Cutting fenders - now the front post 26

[bigcountry]

The tape in the center of one flare in the picture is what I consider the center of the opening. I am trying to get that over the center of the axle. Looks like I will need to notch the front a little as stated earlier. Thanks for all the replies it has been a big help.

 

[savage]

I know sykanr0ng, just give him a idea how the top part is between the gas doors, if he doesn't want to notch it.bigcountry, what brand are the flares?

 

[bigcountry]

I know sykanr0ng, just give him a idea how the top part is between the gas doors, if he doesn't want to notch it.bigcountry, what brand are the flares?

Bushwackers from graveyard.

 

[WASP1971]

Those are the original design Bushwackers. They DO NOT center the tire in the opening! Stick with the molded area of the flare on the body to position. I had the same ones and ended up ordering another set of XL Bushwackers to get more clearance at the front.

 

[Jc.av8r]

You wouldn't happen to have a picture of that would you. The way it curves hard in the front, I am not sure what you are talking about.

This one overlaps, but it should be cutout. (Pretty sure the aux door on this EB is useless.)

 

[bigcountry]

Now the front - I put a 33 inch tire on it. this looks pretty good to me.

 

[bax]

Looks good to me. clearing the front corner of the fender is always my concern. Check it and if its going to clear then your good.