• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

D44 factory high steer

OX1

Bronco Guru
Joined
Aug 26, 2003
Messages
3,472
Decided to tackle the steering next using cut and pasted 78/79, 1/2 ton steering. Tie rods do not fit into the knuckles and I have a set of 78/79 knuckles with what looks like newer balljoints, figured I'd just swap the entire knuckles out.

Tore down one side and the stock d44 knuckles look to have the steering substantially higher than the 1/2 ton stuff. So I guess it's off to get a ream......... %)
 

Attachments

  • DCP02922.jpg
    DCP02922.jpg
    106 KB · Views: 54
  • DCP02923.jpg
    DCP02923.jpg
    123 KB · Views: 81

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
even with the reamer you will need the TRO bushings. Otherwise you get an hour glass shape in the knuckle instead of full contactwith the tie-rod end.
 
Top