Community
Buy / Sell
James Duff Rust Bullet Sexton Offroad
Bronco Tech
Ford Bronco Parts - Classic Vintage Early Bronco Parts
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Dana 20 Intermediate shaft replacement Question

6

68bronco1x

New Member
Joined
Jul 6, 2014
Messages
14
I have a 68 bronco dana 20 transfer case that has a 1.25" diameter Intermediate shaft. The shaft needs to be replaced. Can anyone tell me if a dana 18 or jeep dana 20 1.25" shaft will work as a replacement ? From the pictures I have seen of the shafts...the dana 18 shaft looks the same but not sure about the length. The Jeep dana 20 shaft looks the same but has a groove cut in one end next to the flattened end. Are the shafts the same length as the Ford Bronco shaft ? Bronco shaft measures 1.253" dia. X 5.038" Long
Any input would be greatly appreciated
 
Last edited:
You must log in or register to reply here.

Similar threads

A
Dana 20 Intermediate Shaft Assembly
Replies
2
Views
646
Amitchla
S
Dana 20 intermediate shaft tightness
Replies
14
Views
3K
JB Fab
broncosbybart
  • Locked
NC C4 Intermediate Adapter Housing and Dana 20 Transfer Case Input Shaft
Replies
0
Views
1K
broncosbybart
B
  • Locked
IL Dana 20 transfer case with C4 intermediate housing and spud shaft
Replies
0
Views
1K
bronconut1
B
  • Locked
SOLD Dana 20 6cyc intermediate housing with spud shaft
Replies
0
Views
677
bronconut1
Top