• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Dash Pad options

bwalls

New Member
Joined
Aug 1, 2021
Messages
21
Loc.
Dallas
Hello - I'm looking to replace the dash pad on my 77. I've seen various pics floating around of some broncos with dash pads that appear much narrower than stock. So, rather than coming forward about 6" they appear to only be 2-3". Anyone seen these or know where I can find one?
Thanks!
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,122
Loc.
Cuchara, CO
Never seen a narrower dash pad. The 66-67? pad is the same depth for the full width of the pad. Later ones are narrow around the steering wheel. Many folks just leave the pad off unless they are doing a very stock restoration. Personally I prefer the no pad look.
 
OP
OP
B

bwalls

New Member
Joined
Aug 1, 2021
Messages
21
Loc.
Dallas
Never seen a narrower dash pad. The 66-67? pad is the same depth for the full width of the pad. Later ones are narrow around the steering wheel. Many folks just leave the pad off unless they are doing a very stock restoration. Personally I prefer the no pad look.

Thanks, Scoop. Yeah, for 66-77. I'll try to find a pic and post. I have my pad off now and I like the look too. That's really what prompted this question because these narrower dash pads I've seen seem to have the best of both worlds.
 

Jakedog

Bronco Guru
Joined
Jan 25, 2010
Messages
1,010
I had a 75 in the 90's and I had an upholstery shop redo my stock dash. Instead of a stock look the guy made it with a baseball stitch in the front.
It came out really nice.
If you have a good upholstery shop they should be able to make what you want.
 
Top