I'm in FL and will ship. I prefer Paypal, but also accept cash, certified check, and money orders. All of the parts listed are in good, useable condition and are used unless otherwise noted. Please note that I don't have pics of these items, but guarentee them to be as described or better.
Detroit Locker for 30 spline D44 3.92+ gear ratios, perfect shape! SOLD
Ford radius arms from 78 F150 4wd with caps, nice shape, no bends, just need to be cleaned up SOLD
78-79 F150/FSB radius arm brackets, perfect for SAS SOLD
Radius arm brackets from a 76? Ford 2wd/4wd? $25 shipped
Hi-Pinion Dana 44 housing with weld on wedges. Comes with bearing caps and diff cover, no outers, carrier, gears, shafts, steering, etc. Nice shape, perfect for a project axle or coverting to full width, from a 1976 Ford F150, BOM 603808 SOLD
HP D44 3.54 gears(ring & pinion), used, but nice, pinion bearings are included $15 shipped
D44 spider gears and I have two sets Free, buyer pays shipping
Ford D44 stub shafts, I have a pair SOLD
76-79 Ford disc brake caliper brakets SOLD
Complete set of 76-79 Ford disc brake 5 lug outers. You get, knuckles, spindles, caliper brackets, calipers, barely used pads, hardware. Knuckles have been reamed for Chevy TREs with the TRE on top of the knuckle for better steering geometry. Hubs and rotors not included. SOLD
Spring plates and u-bolts for a 80-91 Jeep Wagoneer D44 front axle SOLD
1986 Waggy front Dana 44 assembly, fully rebuilt using top quality components. 0 miles on this axle since rebuild.
WMS ~ 61.5, pumpkin on driver side(driver's side drop)
4.88 Yukon gears - 0 miles, brand new
3.92+ carrier
Aussie Locker
Warn manual hubs and a set of drive flanges(caps, spacers, slugs)
Professionally installed gears using Yukon install kit
Flat top knuckles with tall WFO hi-steer arms on both sides
Pro grade Spicer ball joints
All new bearings and seals throughout
Small bearing spindles with 5x5.5 lug pattern outers
Axle shafts filled with Spicer u-joints
DOM tie rod using Chevy 1 ton TREs
All bracketry removed ready for links or SOA
Cleaned and painted with black Rustoleum
All new brake pads, calipers, etc
Will include spring plates and u-bolts if you plan on using leaf springs with it
You can't build an axle like this for what I'm selling it for.
Will not part out this axle
SOLD
Detroit Locker for 30 spline D44 3.92+ gear ratios, perfect shape! SOLD
Ford radius arms from 78 F150 4wd with caps, nice shape, no bends, just need to be cleaned up SOLD
78-79 F150/FSB radius arm brackets, perfect for SAS SOLD
Radius arm brackets from a 76? Ford 2wd/4wd? $25 shipped
Hi-Pinion Dana 44 housing with weld on wedges. Comes with bearing caps and diff cover, no outers, carrier, gears, shafts, steering, etc. Nice shape, perfect for a project axle or coverting to full width, from a 1976 Ford F150, BOM 603808 SOLD
HP D44 3.54 gears(ring & pinion), used, but nice, pinion bearings are included $15 shipped
D44 spider gears and I have two sets Free, buyer pays shipping
Ford D44 stub shafts, I have a pair SOLD
76-79 Ford disc brake caliper brakets SOLD
Complete set of 76-79 Ford disc brake 5 lug outers. You get, knuckles, spindles, caliper brackets, calipers, barely used pads, hardware. Knuckles have been reamed for Chevy TREs with the TRE on top of the knuckle for better steering geometry. Hubs and rotors not included. SOLD
Spring plates and u-bolts for a 80-91 Jeep Wagoneer D44 front axle SOLD
1986 Waggy front Dana 44 assembly, fully rebuilt using top quality components. 0 miles on this axle since rebuild.
WMS ~ 61.5, pumpkin on driver side(driver's side drop)
4.88 Yukon gears - 0 miles, brand new
3.92+ carrier
Aussie Locker
Warn manual hubs and a set of drive flanges(caps, spacers, slugs)
Professionally installed gears using Yukon install kit
Flat top knuckles with tall WFO hi-steer arms on both sides
Pro grade Spicer ball joints
All new bearings and seals throughout
Small bearing spindles with 5x5.5 lug pattern outers
Axle shafts filled with Spicer u-joints
DOM tie rod using Chevy 1 ton TREs
All bracketry removed ready for links or SOA
Cleaned and painted with black Rustoleum
All new brake pads, calipers, etc
Will include spring plates and u-bolts if you plan on using leaf springs with it
You can't build an axle like this for what I'm selling it for.
Will not part out this axle
SOLD
Last edited: