• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Distinctive Ind. OE Style Rear Seat w/ Storage

JeffG

Contributor
Sr. Member
Joined
May 7, 2004
Messages
513
Loc.
San Antonio, TX

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,617
Loc.
PNW
$800+ ??? Broncos are a rich mans toy now! :(

I built a new rear seat frame supporting dual Toyota Celica bucket seats for my kids back in '86... the "frame" was actually 2 individual boxes that fit btw the wheel wells and from tailgate to the frt edge of the now-, new rear bucket seats. Lockable with the same key as my house since I dislike carrying a bunch of keys. Probably $20 bucks worth of steel and $20 for two locks back then...

...and after spending $800+ you still have a seat w/o any neck or back protection. I'd never put my kids in a stock back seat-ever.

Never forgive myself if I could have easily protected them from lifetime neck and spine injuries by simply installing a seat with neck/back protection... ours was our DD for the entire time from bringing them home from the hospital till they graduated from HS.
 

BRONCOchild

Bronco Guru
Joined
Sep 4, 2005
Messages
2,029
Or, you can go to HomeDepot and just make yourself a box that you can simply roll underneath. It will definitely be a lot cheaper. Same concept, just more economical.
 
Last edited:

matts460

Sr. Member
Joined
Feb 3, 2013
Messages
583
Ahh kids are made of rubber (kidding). Wouldn't take much to weld to seat frame to mount head rest. Could easly make head rest same as the seat with wood back and thick foam covered in vinyl, could look factory. Time to start fab something.
 
Top