Door Re- Assembly Help

[horseman]

My doors are completely dis-assembled for paint. Now i am ready to put it all back together. I need help with order in which to do it and any tips on how not to scratch the new paint. This is what I am thinking as far which order

1 exterior trim
2 window felt / anti rattle kit ( new )
3 door locks/door handle/door latch
4 regulator and glass

Thanks for your help

 

[t.lay]

use masking tape around the install locations- should give you a little extra protection. Your order looks ok. Careful with the felt/anti rattle stuff

 

[getfuzzy]

Don't forget the windwing it goes in last, put your glass down in the door then the windwing in.

 

[baglock]

1, 3, 4, 2.

 

[deltarat]

I just did one last night.
door locks and rods
window in door to bottom with out stop
wingwindow
raise glass and attach to regulator
bottom window guides
top window felt
window stop

 

[trailpsycho]

I agree with the 1, 3, 4, 2 although I had no exterior trim....although I would add the stop to 4...you may have to loosen it a time or two during the process...but its better to be in there as a catch and then swing it out of the way when you need to...then to have the glass get away from you.

 

[horseman]

Thanks all I put on the exterior trim today. Sounds like latch and rods are next.