• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Drilling holes in firewall for Centech kit

Moaiz

Full Member
Joined
Sep 5, 2002
Messages
340
Loc.
Albuquerque, NM
Since I have an earlier bronc than the kit is designed for I would like to drill the two holes as close to the 'stock' locations as possible. Anyone know how many inches in/down the holes on driverside and passenger side are located? I looked around online but was unable to find anything that would even help me guess at it.
 

thesnake

Bronco Guru
Joined
Jun 20, 2001
Messages
3,503
I didn't think to measure my 73 before I sold it. I took the centech harness out of it and plan to put it into my 66. If I come up with the measurements, I'll post it.<br><br>snake
 
Top