• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Drum master cylinder push rod length

Anewway

Newbie
Joined
Aug 8, 2019
Messages
72
Silly me threw out the old master cylinder and push rod. The new one came with 2 different push rods. Which one do I use?
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,875
I once had that issue, the long one was for manual brakes, where the short one was for the vacuum power booster. but these 2 rods were very different in length so it was obvious. if you have to guess Take off the locking clip off the rod and test fit. then place the clip on the rod and send her home. once the clip locks in you cant get it out.
 
Top