• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Duff lower coil retainer

67ANNMRGT

New Member
Joined
Nov 30, 2018
Messages
20
I've installed duffs long travel radius arms..different from the stock arms there is an additional mounting hole for the lower coil retainer cups. I currently mounted it to the forward set of holes. See link for photos...am I in the correct spot? Or should I move it back..there is a 1" spacing between holes.

https://photos.app.goo.gl/kZABnRn6EV8ibwqn7

Thanks


kZABnRn6EV8ibwqn7
 

Monster Mike

Sponsor/Vendor
Bronco Guru
Joined
Dec 29, 2010
Messages
1,774
I've installed duffs long travel radius arms..different from the stock arms there is an additional mounting hole for the lower coil retainer cups. I currently mounted it to the forward set of holes. See link for photos...am I in the correct spot? Or should I move it back..there is a 1" spacing between holes.

https://photos.app.goo.gl/kZABnRn6EV8ibwqn7

Thanks


kZABnRn6EV8ibwqn7


Yes you're using the correct holes.

The additional hole is there for two reasons.

1. some Broncos coil buckets are not welded on square. Depending on what side is shifted forward you can slide the lower retainer back to get the spring to stop bowing or just looking out of square. This is also a great feature for the guys running the James Duff T-Rex arms.

2. A quick and simple way to extend your wheel base 1" forward w/o having to move anything. Just keep in mind this will not work if you're running JD stage 2 shock hoops with dual shocks behind the tower. The shock closest to the coil bucket will make contact with the bucket.

MM
 
OP
OP
67ANNMRGT

67ANNMRGT

New Member
Joined
Nov 30, 2018
Messages
20
Thanks Monster Mike for the clarification. Love the quality and craftsmanship of the the product.
 

Monster Mike

Sponsor/Vendor
Bronco Guru
Joined
Dec 29, 2010
Messages
1,774
OP
OP
67ANNMRGT

67ANNMRGT

New Member
Joined
Nov 30, 2018
Messages
20
I would be interested in talking to you about using one of your 4-link systems on a custom 9" rear housing. After installing your long radius arm fronts I really like the idea of converting the rear.

Ryan
 

Monster Mike

Sponsor/Vendor
Bronco Guru
Joined
Dec 29, 2010
Messages
1,774
I would be interested in talking to you about using one of your 4-link systems on a custom 9" rear housing. After installing your long radius arm fronts I really like the idea of converting the rear.

Ryan

Ryan, thanks for leaving a review on the coil buckets. You have been entered into a drawing to win a $100 Duff bucks :cool:

Our 4 link has been installed on several custom 9” housings. I’d be thrilled to discuss with you those details.

MM
 
Top