Duff Monster Suspension

[BroncoinAlaska]

Almost done with the install of the 3.5" Duff Monster Suspension kit and I would like to see some install pictures of other duff kits to compare my work too. Mostly concerned with the front suspension and extended radius arms.
Like how manny threads are exposed on the radius arms?

 

[mavereq]

have you welded your frame brackets on yet?

 

[BroncoinAlaska]

I have bolted everything in and have not gotten to the welding. So now is the time to double check everything.

 

[Scoop]

Almost done with the install of the 3.5" Duff Monster Suspension kit and I would like to see some install pictures of other duff kits to compare my work too. Mostly concerned with the front suspension and extended radius arms.
Like how manny threads are exposed on the radius arms?

We installed the Duff long arms at the MEB Wrench and Roast this summer and there were very few threads showing - maybe 2 at the most.

This is the best pic I found and, unfortunately, you can't see the threads, but you can sort of see how close the heim is to the end of the arm. Hope this helps.

 

[broncosbybart]

I have 2 threads on mine as well. You don't want to have too many threads showing, as the heim is the weakest part of the arm (in theory). IMHO, they are so massive, that it really isn't super important. You'd have to really screw something up to break anything there.

 

[BroncoinAlaska]

Got any pictures of the springs mine have a slight bow to them when you are looking at them from the side.

 

[ransil]

Got any pictures of the springs mine have a slight bow to them when you are looking at them from the side.

I used shims under my coil spring cups. I got them from one of the Bronco vendors , can't remember which one it was but I think they were out of Colorado.

 

[gearida]

Mine bows too, Duff said this is normal.

 

[Durtymax]

You should have no more than three threads showing IIRC.

 

[mavereq]

Mine bows too, Duff said this is normal.

they bow which direction? it doesn't sound normal.