- Joined
- Nov 29, 2005
- Messages
- 1,684
I have watched the video and for the most part everything looks easy enough but what tool do I use to cut through the spot welds on the bolt head behind the original bracket for the track bar. Not only are there two visible welds, I can feel one up on top. It's too narrow for a cut off wheel and all of the sawzall blades are too wide to fit up in there. I'm not going to share all of the creative attempts I have made but I am a long ways from getting that bolt out. In the video Michael simply holds it up and tells you how short it needs to be to push it through and pull it out. I don't have a torch any more or I would be tempted to throw a flame at it. Any ideas?