CA Early bronco heavy duty 1 ton conversion steering

[350hertz]

I have a very heavy duty new steering set up for stock dana 44 best upgrade dom tube with welded bungs and chevy 1 ton tie rods your knuckles and pitman arm will need to be reamed... i can lend you the reamer but will require a 50 deposit once you mail it back anyhow this a great deal for this steering setup usually sells upwards of 300.00 let me know thanks shipping will be around 30.00

 

[SSDDBRONCO]

How long has it been on the bronco for? Does it have any miles on it?

Sent from my SPH-D710 using Tapatalk 2

 

[bronco217]

How can it be a stock 44? Looks like a high pinion to me. What is the knuckle to knuckle measurement? What knuckles did you use? I'm interested just need these answers. Thanks, Tom

 

[JeepGuy]

I have a very heavy duty new steering set up for stock dana 44 best upgrade dom tube with welded bungs and chevy 1 ton tie rods your knuckles and pitman arm will need to be reamed... i can lend you the reamer but will require a 50 deposit once you mail it back anyhow this a great deal for this steering setup usually sells upwards of 300.00 let me know thanks shipping will be around 30.00

Is it stock width? If so does it require reaming of the knuckles to fit the tie-rods?

 

[73stallion]

Looks like a full width track bar too.

 

[Colorado75Bronc]

That's got to be FW I can see the extended trac bar from an f150 or fullsize bronco, and the upper coil tower extensions

 

[JeepGuy]

I recieved a PM from him. He says he has both. Just waiting to hear if it's something he making or just has one of each to sell.

 

[JeepGuy]

I'll take the stock width one you have. PM me your contact info and I'll get in touch with you tomorrow sometime to arrange pickup this weekend.