• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Early Bronco Security Add-ons

Bronco4x4

Sr. Member
Joined
Dec 21, 2009
Messages
621
The PO of my 69 EB drilled a hole in the hood release that sticks through the grille. I think you can put a bicycle lock through it and the grille slot. I never tried but it appears why the hole is there.
 
OP
OP
Crainbow243

Crainbow243

Full Member
Joined
Aug 7, 2015
Messages
230
Revisiting this again... for me it comes down to four things:

1. Good insurance
2. Vehicle tracking
3. Hood Lock
4. Ignition interlock/immobilizer

I haven't looked into vehicle tracking yet and really have not found a good way to lock the hood, except maybe this: https://amzn.to/2VbFDUj but it is hard to tell how that hooks up from the picture.

In terms of immobilizer, something simple like this (https://amzn.to/3a9Gedr) or a hidden switch would work. Something just to prevent the screwdriver starting method.

Still looking for advice if you guys have anymore. Especially for a hood lock.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
I had keyed hood locks on my steel hood back in the '70's. Looked like flat hood pin setup till you noticed a weird looking key fit in it.

Worked great.
 
OP
OP
Crainbow243

Crainbow243

Full Member
Joined
Aug 7, 2015
Messages
230
I had keyed hood locks on my steel hood back in the '70's. Looked like flat hood pin setup till you noticed a weird looking key fit in it.

Worked great.

Any links or pictures of it?

Looking for a 1975 Bronco with stock hood
 

roundhouse

Bronco Guru
Joined
Sep 5, 2003
Messages
2,956
Two of
My three classic vehicles have hidden push buttons for the starter
One is in series with the key so you have to do em both at the same time

And the other has a push button
The ign switch is wired for crank/run but not crank AND run.

The starter will run with the gin switch but there is no power to the coil unless you mash the hidden button

We did that because we got a new ign switch and it was apparently defective and didn’t work for crank and run

On another 80s ford the ign switch went bad and it would turn on the coil and accessories but wouldn’t run the starter
We were stranded and I noticed the windshield squirter pump and wore was right next to the starter relay on the fender , I just moved the washer pump wire to the starter relay to get us going and we left it like that for years mostly because we were too lazy to fix it right but I’m pretty sure it kept it from getting unauthorized use at least once .
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
Yup, those look just like the ones I had 40 yrs ago!
 
OP
OP
Crainbow243

Crainbow243

Full Member
Joined
Aug 7, 2015
Messages
230
Have also been researching GPS trackers for the vehicle, because regardless of the ignition interlocks and safety's a tow truck can always take it.

This one seems ok, $10 a month for 10 min pings...

Has anyone used a GPS tracker or have one they like?
 

jonpblewis@yaho

Full Member
Joined
Apr 9, 2007
Messages
207
Loc.
San Diego, CA
I've been thinking about sliding a 13-foot long piece of 1" diameter cable through a hole in the front bumper at the center of the frame rail. Then weld a stopper on the end so it cant be pulled back out. Push it down the inside of the frame rail with another longer stopper at the other end. Then when you park you just need to be in front of a tree, light post or whatever. You can then pull that cable out and run it around the light post and push that longer stopper end through another hole at the other frame rail. That stopper end has a tip on it that clicks into the hasp hole of a heavy dudy pad lock welded to the frame behind the bumper. So its like a huge bike lock for the Bronco.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
I have "Stargard" on my F150.

BIG drawback is it works on a cell signal. At least for me as we are in the boondocks a lot and often the Bronco is parked in a canyon some place w/o reception...however as it got towed or driven away whenever it reached cell service it would track the vehicle with GPS and or Satellite image anywhere there is a signal.

Works good. Just not sure I want it in the Bronco. Better than nothing for sure. One time payment, good for "life". However long that is. I've owned this one 43 yrs so I wonder what their definition of "life" is? :)
 
OP
OP
Crainbow243

Crainbow243

Full Member
Joined
Aug 7, 2015
Messages
230
I have "Stargard" on my F150.

BIG drawback is it works on a cell signal. At least for me as we are in the boondocks a lot and often the Bronco is parked in a canyon some place w/o reception...however as it got towed or driven away whenever it reached cell service it would track the vehicle with GPS and or Satellite image anywhere there is a signal.

Works good. Just not sure I want it in the Bronco. Better than nothing for sure. One time payment, good for "life". However long that is. I've owned this one 43 yrs so I wonder what their definition of "life" is? :)

Tried looking "stargard" up and it looks like its only a dealer installed option... I liked the idea of a one time price though.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
You can take it to a dealer and they can install it for you.
 
Top