• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Early build '66 shock length

chris-nc

Bronco Apprentice
Joined
Sep 1, 2020
Messages
52
I have an early build (Sept '65) '66 Half Cab that has the forward facing rear shocks. Without taking them off to compare, does anyone know if the stock shocks on the early '66's were the same length for the front and rear?

If so, it would be easier to order 4 of the same, than trying to find a different length for the rear with a post style top mount.

Oh, this is on a stock height suspension with plans to keep it that way.

Chris
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,223
I have an early build (Sept '65) '66 Half Cab that has the forward facing rear shocks. Without taking them off to compare, does anyone know if the stock shocks on the early '66's were the same length for the front and rear?

If so, it would be easier to order 4 of the same, than trying to find a different length for the rear with a post style top mount.

Oh, this is on a stock height suspension with plans to keep it that way.

Chris

The specs I have for the shocks for the early 66s is as follows:

Front - 10.74 compressed, 17.06 extended. 6.625 stroke
Rear - 11.39 compressed, 19.27 extended. 7.88 stroke

Todd Z.
 

EPB72

Contributor
Bronco Guru
Joined
Jul 13, 2019
Messages
1,216
Loc.
Pleasant Hill, CA
Looking at the KYB catalog they are different park #'s front and rear including a serial # cut point.. As Todd noted there of slightly different length ,and i'd bet the valving is different as well .....So stock or not I think you would want front and rear specific valving,
 
OP
OP
chris-nc

chris-nc

Bronco Apprentice
Joined
Sep 1, 2020
Messages
52
Cool, thanks for the follow up information. I had a feeling they were different, but thought I'd ask here before trying to remove them just to measure.


Chris
 
Top