• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

early FoMoCo optional Warn lockout hubs

Broncitis

Sponsor/Vendor
MEB Founder
Joined
May 18, 2004
Messages
5,283
There was a thread the other day about 66 lockout hubs where I mentioned the optional FoMoCo Warn units.

Here are some pics I took tonight of an original early set we recently cleaned up for the '67 U14 project we're building for my mother. We also have these on my dad's '66 U13.

As you can see, they look very similar on the outside to current Warn Premiums, however there are some notable differences:
  • Dials are real brass, not yellow laquer coated aluminum
  • Oval boss in black recess is stamped
  • Screws are larger 10-32 size


Internally, there are lots of differences. These were much more complex and solid than the current Warn Premium design. Lots of machine work in these, back in pre-CNC days to boot.

I could not quickly put my hands on the new box of premiums I have hiding around here somewhere for comparison. I will try to get some pics this weekend if someone else does not post any.
 

Attachments

  • DSCN2096.jpg
    DSCN2096.jpg
    91.1 KB · Views: 286
  • DSCN2098.jpg
    DSCN2098.jpg
    59.2 KB · Views: 248
  • DSCN2088.jpg
    DSCN2088.jpg
    80.3 KB · Views: 248
  • DSCN2091.jpg
    DSCN2091.jpg
    85 KB · Views: 232
  • DSCN2095.jpg
    DSCN2095.jpg
    71.5 KB · Views: 228
  • DSCN2093.jpg
    DSCN2093.jpg
    100.4 KB · Views: 220

widowmaker77

Contributor
Sr. Member
Joined
Oct 11, 2007
Messages
564
ive got a set of those on a early 66. never thought they were original. figured they were aftermarket replacements.
 

WyleCoyote

Bronco Guru
Joined
May 2, 2002
Messages
1,739
Those look really strong, but I would be afraid to run them on a serious wheeler, because of the fact they are so rare!
 

eaglenest66

Contributor
Bronco Guru
Joined
Sep 14, 2006
Messages
1,255
Those are the eight bolt version! Have them on two of my '66s. There is also a six bolt version that looks identical to these. Have some old literature and they are listed under the C6.... engineering codes.
 

13below0

Jr. Member
Joined
Jan 15, 2011
Messages
112
Loc.
Erie PA
I think there was a thread on Pirate about how much better them old hubs were than even the warn premium's. I think they were trying to get interest to have them build again.
 

Mao

Jr. Member
Joined
Jan 25, 2009
Messages
145
Loc.
Greenwood, LA
Do they install and fit tight to the hub? My new-style Warns do not! Was disappointing because it would seem that they need a second or larger o-ring to remove the slack. I can wiggle them around easily by hand.
 

ep67bro

Contributor
Bronco Junky
Joined
Aug 28, 2008
Messages
3,873
Loc.
Easton, MD
I have a set on my 67. Always thought they had been added on but they looked really old. Dont know if they are 6 or 8 bolts have to check tonight.
 

66Bronco

Sr. Member
Joined
Jul 31, 2001
Messages
853
Those are the same hubs that are on the Silver Fox. I believe they were bought new in '67 from Ken Roggy Ford.


-Terry
 

tcb42

Full Member
Joined
Jun 23, 2008
Messages
308
I have a set that I took off and replaced with a new set. Mine still has the Warn equipped sticker on the dash. Still have the old set too along with the paperwork that came with them.
 

69 Bronco 69

Jr. Member
Joined
Mar 9, 2010
Messages
91
Loc.
Aurora Co
Those are nice. An idea to make it perfect would be to find one of the later model handles to keep in the glove box that makes it easier to lock them in and out. them suckers are hard to turn with your fingers sometimes and warn made a little handle that fit on the hub to help you turn them. I remember having one after doing many auto to manual hub conversions many years ago.
 

BajaBronco

Contributor
Bronco Guru
Joined
Apr 30, 2003
Messages
4,101
I was walking by an old D30 in my junkyard today and did a double take - I have a set too! 8 bolt. Looks cool with the larger bolts. Yay.
 

Mill KNOB

Bronco Guru
Joined
Jun 25, 2007
Messages
1,684
Loc.
Rock Hill, SC
My 68 has a set on it. I figure that the original owner that I bought it from put them on it. But I guess not. Was it an option on the bronco?
 

darcytribe

Full Member
Joined
Dec 28, 2010
Messages
213
anyone know if these were offered in later years? (69-77). Will they fit all years?
 
OP
OP
Broncitis

Broncitis

Sponsor/Vendor
MEB Founder
Joined
May 18, 2004
Messages
5,283
anyone know if these were offered in later years? (69-77). Will they fit all years?


Yes, I will have to look to see how late they were offered, but definitly into the early-mid 70's.

Yes.

There are actually two PN's for them in the Ford Truck Accessory catalogs, one for "manual locking hubs" and one for Automatic Locking Hubs", both look the same in the pics. I'm not sure what is different internally?
 
Top