City:
Brush Prairie, WA
Price: $ 500
Price: $ 500
Up for sale is a used A9P EEC-IV ECU and Tweecer RT piggyback tuner that came out of my '74 Bronco. I ran this for years, but I'm transitioning over to a new EFI system so this is up for sale.
Both systems were fully functional when removed. The A9P obviously has the seal removed in order to attach the Tweecer RT. The Tweecer setup has some residual duct tape marks on it. It came to me that way, and I never tried to clean it up. I'm also missing the selection knob.
It has been a long time since I used the Tweecer, but it's a hardware based piggyback tuner. The software is free and can be obtained from Tweecer.com. The RT allows real time data visualization and has additional slots for different tunes. Since it's a piggyback tuner it doesn't actually do anything to the physical ECU and can be removed at any time. The Tweecer software will let you tune and will also do data logging, but I believe most people end up buying EECAnalyzer or Binary Editor (which would be an additional license cost).
If you buy both, I'll throw in an 80mm Lightning MAF sensor that includes an air filter adapter. (Not pictured at the moment...will get one later today.) You need the Tweecer to run this, but it's really simple to pull in the LMAF mass transfer curve during the setup.
EEC-IV ECU - $350
Tweecer RT - $250
Both for $500 + 80mm LMAF
I'm open to offers as well, but I based the ask based on what I've seen lately. A9P/A9L ECU's are pretty desirable these days, but I'd really prefer to avoid selling stuff on eBay!
Both systems were fully functional when removed. The A9P obviously has the seal removed in order to attach the Tweecer RT. The Tweecer setup has some residual duct tape marks on it. It came to me that way, and I never tried to clean it up. I'm also missing the selection knob.
It has been a long time since I used the Tweecer, but it's a hardware based piggyback tuner. The software is free and can be obtained from Tweecer.com. The RT allows real time data visualization and has additional slots for different tunes. Since it's a piggyback tuner it doesn't actually do anything to the physical ECU and can be removed at any time. The Tweecer software will let you tune and will also do data logging, but I believe most people end up buying EECAnalyzer or Binary Editor (which would be an additional license cost).
If you buy both, I'll throw in an 80mm Lightning MAF sensor that includes an air filter adapter. (Not pictured at the moment...will get one later today.) You need the Tweecer to run this, but it's really simple to pull in the LMAF mass transfer curve during the setup.
EEC-IV ECU - $350
Tweecer RT - $250
Both for $500 + 80mm LMAF
I'm open to offers as well, but I based the ask based on what I've seen lately. A9P/A9L ECU's are pretty desirable these days, but I'd really prefer to avoid selling stuff on eBay!
Attachments
-
PXL_20221213_044020407.MP.jpg218.6 KB · Views: 104 -
PXL_20221213_044027308.jpg201.6 KB · Views: 106 -
PXL_20221213_044040142.MP.jpg357.2 KB · Views: 87 -
PXL_20221213_044055710.jpg99.2 KB · Views: 107 -
PXL_20221213_044149852.jpg277.2 KB · Views: 115 -
PXL_20221213_044155016.jpg158.6 KB · Views: 111 -
PXL_20221213_044204815.jpg226.8 KB · Views: 98











