• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

SOLD Electric wipers plug, windshield harness

Status
Not open for further replies.

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,695
Loc.
San Martin, CA
City: San Martin, CA
I am converting Clifford to factory electric wipers. (72 date stamped motor)

I am looking for the factory square 4-prong plug on the windshield harness, long tails would be good.

I haven't found a picture of it yet, but will post it if I do.

Thanks, Doug.
 

Attachments

  • LG-2342_Wiper_Motor_Wiring_Harness_2.jpg
    LG-2342_Wiper_Motor_Wiring_Harness_2.jpg
    59 KB · Views: 59
Last edited:

BajaBronco

Contributor
Bronco Guru
Joined
Apr 30, 2003
Messages
4,096
Napa makes a battery connector in their yellow electrical parts packaging area that is basicly half that connector....and it comes as a connecting cable about 10" long. What I've done is bought that, and cut the wires in the middle, taped the ends together to resemble what you have there and used it as the plug pictured.
 
OP
OP
904Bronco

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,695
Loc.
San Martin, CA
Napa makes a battery connector in their yellow electrical parts packaging area that is basicly half that connector....and it comes as a connecting cable about 10" long. What I've done is bought that, and cut the wires in the middle, taped the ends together to resemble what you have there and used it as the plug pictured.
Thanks for the suggestion Andrew.
 
OP
OP
904Bronco

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,695
Loc.
San Martin, CA
I have calls out to people known to me to have "Bronco Stuff" rat-holed away.

Kari at Northeast classic Ford parts checked with Nick and he believes they should have one or more, but time and better weather is needed to do a search.

It is always good to have a plan B and I appreciate the options being shared!
 

klcornett

New Member
Joined
Oct 21, 2012
Messages
46
I have one with 3" wires. Send me a PM with your address and I will get it out to you.
 
OP
OP
904Bronco

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,695
Loc.
San Martin, CA
Part will ship tomorrow and I will close this thread when it is in my hands...

Thank you klcornett!
 
OP
OP
904Bronco

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,695
Loc.
San Martin, CA
Part arrived today and I installed it. Thank you again Ken for the part and your efforts on my behalf, it is much appreciated.

Doug.
 
Status
Not open for further replies.
Top