• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Engine Cage Coilovers setup?

Jonz612

New Member
Joined
Sep 4, 2009
Messages
29
Loc.
Peoria
i am building a 1966 half cab and i have a set of 12" 2.5 King coil overs for the front. i want to get some ideas for the mounts on the axle and the towers and engine cage.
 

bowhunter

Bronco Guru
Joined
Apr 9, 2005
Messages
1,531
Well....if you were closer, you could run over to BailieBilt and take a look at his.......but!?!?!
 

MpCrewcab

Sr. Member
Joined
Jul 12, 2004
Messages
462
Loc.
Jefferson, WI
Couldnt find pics of the mount on the axles, but here are a few of the hoops and then the tie into the cage and engine surround. There is then unboltable bar that goes across the motor and attaches to both shock hoops. Post up if you need more pics. These were a few of the build pics from a few years ago.
 

Attachments

  • 1.JPG
    1.JPG
    81.2 KB · Views: 89
  • 4.JPG
    4.JPG
    72.4 KB · Views: 88
Top