• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Exhaust systems

lasadoor

Full Member
Joined
May 22, 2008
Messages
421
Loc.
San Diego
I need to replace the exhaust pipes from the manifolds on back. LMC has a set for less than $300, bolt on no welding. Which is good for me. But I'd like to hear input from those with more experience and knowledge.

Merry Christmas and Happy Holidays!
 

BkDanO

Newbie
Joined
Oct 14, 2012
Messages
47
I just used a guy out in Santee who did an awesome job. Maybe a little more than you are wanting to spend, from the headers back with two new magnaflows was 450. Let me know if you want his info and I will dig it out for you.
 

00gyrhed

Bronco Guru
Joined
Aug 3, 2006
Messages
2,428
highly recommend you go 2 into one. makes the underside a lot less congested and it can be done cheaper than most dual systems. in theory they increase low end over duals and don't give up anything at the top when its properly sized but a crossover between the duals will pretty much negate that.

again that's all theory. in actual driving and each properly sized, not too big and not too small you wont really notice a difference but you will have one less muffler to hang up or rot out.

I like the way the super single sounds as well.

I built mine to exit over the frame and run down the passenger side outside the frame. gave me room for a 7 gallon air tank under the bed, and easy access to the fuel pumps and surge tank for the EFI.

The heat in the cab was greatly decreased as well.
 

mac77

Jr. Member
Joined
Apr 26, 2005
Messages
196
Loc.
Vicksburg
Bc 2 into 1

I have a bc 2 into 1 I am fixing to take off. Maybe 10 miles on it. Don't like the routing of it. Maybe I have it on wrong but just not crazy about it. If interested get in touch with me. It is for stock manifolds.
 

BluebroncoNC

Bronco Guru
Joined
Jul 30, 2007
Messages
1,728
Loc.
Asheville, NC
Hmm, I'm with checking with a local shop, seems I paid $300.00 to have a custom split system installed from the headers back, but I had the mufflers, that I traded for a different set from them. Went from Flowmaster to Magnaflows.
 

WASP1971

Jr. Member
Joined
Jun 20, 2005
Messages
269
Loc.
Mary Esther, Florida
I just ordered the system from Sweet Thunder Exhaust. They advertise in the vender forum. I let you know how it goes once I get it. I thought it looked really nice with the X-pipe and dual outlets out the back.
 
Top