Explorer 5.0 harmonic balancer

[kffain]

Could someone please tell me what size the four taped holes are in the harmonic balance on the 5.0 ? My puller set does not have bolts that will fit, they appear to be metric. Thanks in advance.
Kyle

 

[904Bronco]

Kyle I want to say they are 3/8" course thread... They might have a load of dirt in them. You might have to blow them out and possible run a tap to clean the threads.

I am assuming Mustang 5.0 and not Explorer.

 

[kffain]

Sorry, its a Explorer. My 5.0 Mustang has the 3/8" bolt holes, but this Explorer appear smaller. something between a 1/4" and 5/16' I am thinking metric. But thank for the reply
Kyle

 

[904Bronco]

Sorry, its a Explorer. My 5.0 Mustang has the 3/8" bolt holes, but this Explorer appear smaller. something between a 1/4" and 5/16' I am thinking metric. But thank for the reply
Kyle

Well then they are probably 8mm, (close to 5/16) there are three of them, right? I do not remember the pitch... But same deal with the clean out/tap

 

[kffain]

Explorer harmonic balancer

Thank you 904 Bronco for the help. Have a great day!
Kyle