74BroncoCO
Bronco Guru
- Joined
- Nov 3, 2004
- Messages
- 2,378
Well you have seen the transformation of steel into a bumper, but it's finally here, the final product. I am pleased with it. It was a lot of work and would have gone faster if I had my own tools, but it was a blast. Plus, with the help of those with the tools, I learned a lot too. (Thank you Heinz_67 - Miley Made
) Now I know what tools I would like to have in my shop...when I get a shop.
This is where it sat since I got here to texas 3 months ago:
With the help of another 4x4 enthusiast, we welded on a few more things and I ground it down to bare metal again, and primed it:
I painted it on Sunday afternoon and finally last night I got it installed.
I have a latch to hold it closed, but I decided to put in a safety measure to ensure that it would stay closed. I have a similar mechanism to hold it open as well:
Thanks for your help here and opinions. I would like to build a front someday, but that may not be until I have most of my own tools.
This is where it sat since I got here to texas 3 months ago:
With the help of another 4x4 enthusiast, we welded on a few more things and I ground it down to bare metal again, and primed it:
I painted it on Sunday afternoon and finally last night I got it installed.
I have a latch to hold it closed, but I decided to put in a safety measure to ensure that it would stay closed. I have a similar mechanism to hold it open as well:
Thanks for your help here and opinions. I would like to build a front someday, but that may not be until I have most of my own tools.











