• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

finally scored some disks!

ugly74

Bronco abuser
Joined
Apr 17, 2006
Messages
2,856
Loc.
Colorado
At he U-Pull-U-Pay in Fountain, Co...I found not 1, not 2, but 3! 78-79 Broncos with complete front hubs/knuckles and brakes. and another one that had just the knuckles left...

There should still be 2 left there guys, so if you're in the area and in the market...better go get 'em quick!

I did grab one set (gonna need new spindles...I had ta beat on 'em%))

so now I have the rear disk pieces from a Versailles, and fronts from the 79. freakin sweet, I'm stoked. over the winter I'll acquire the misc. seals and whatnot to get it all together next spring:cool:
 

Bronco73

Contributor
Bronco Guru
Joined
May 29, 2003
Messages
3,016
Loc.
Cape Coral, FL
Go grab the steering boxes. Any trac locs in the rear of one of those Broncos and maybe 4.11 gears? Tilt column?

Grab the complete front axle. It's super easy to narrow and you get a HP axle. To many parts to leave there.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
X2 go back and grab the other parts. Never hurts to have extra spindles hub and rotors ect on hand. But complete setups can easily be sold and the steering boxes are well worth the effort and should sell quick might want to grab the axle shafts as well at leas the short side as they fit EB's may need slight trimming but they fit. the long side has to be shortened and resplined so not quite as good of a score but parts is parts.
 
OP
OP
ugly74

ugly74

Bronco abuser
Joined
Apr 17, 2006
Messages
2,856
Loc.
Colorado
I did grab the axles too...but my time was limited, and the wife was feelin antsy, so I just got what I needed for mine. I mentioned to her about grabbing entire axles, steering columns and every goody I could get my hands on....but I got "the look", so...
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
I say get the pumkins I'd rather have them than the ford disk.. Tilt column is what I'm running.
..........
... I keep thinking my 4BT would look really sweet with the full widths on both ends.
 
Top