mkaenel
Bronco Guru
I did some research last night and this what I found:
I actually found a company ( http://www.firefight1.com/ ) and shot them an email.
Below is his response.
"Dear Matt: Thankyou for your inquiry regarding protecting that Bronco from a fire situation. NASCAR requires us to supply a 10 lb. halon container with a automatic thermal release for the fuel cell. I realize you don't have a fuel cell as situated in a NASCAR race car design but rather want to protect, the engine compartment, the running gear, the interior...you did not mention the gas tank area. Here is what we can do for you. Using Halon, which has no equal as you probably know, we could install a 10 lb. halon with that outlet conveyed to two distribution points. These would be palm activated switches and you would have the option of one unloading in the engine compartment and the running gear (I think that is where you have your gas tank) and the second one, when activated, would unload in the driver's compartment. Does this sound like something you could live with? We attach our palm operated switches to the 1 1/2 tubing found in the interior of most race cars (measures 1 3/4" round) however, if this is not possible, we can locate these devices in the dash board, down on the floor, etc etc. The nozzles are of two types, holes at the end for that direction spraying and holes on the sides for that direction in spraying. (Actually it doesn't mean much as when the halon goes off it floods that applied area. (You only need an 8% mix of halon in the air and NOTHING can burn. It will put out a fire immediately as you probably know. By using a T connection, you can route the aluminum tubing (1/4") to about any area you wish in multiple numbers. We also have automatic thermal releases. You might consider that option as you would then have automatic / and or manual release. COSTING: For an elaborate twin activation system, 10 lb. halon with our exclusive brackets, all piping, SS hoses for connection to activation switches, etc.Probably around $585.00. Delivery.. immediate.Terms: Credit Card.Shipping... haz mat fee at $20.00Ground freight to your location at x Great to hear from you, call me at 321 752 9096 and ask any questions that you may have concerning this e mail One thing to remember, if you have crossmembers in our car using that 1 1/2" tubing, let me know how it is situated."
But I started thinking about George my body shop guy. He is a CORE racer and has built race trucks. He has also custom built fire suppresion systems. I went out there today and told him what I want and is going to think about and give me a price.
I will let everyone know what he says.
Matt
I actually found a company ( http://www.firefight1.com/ ) and shot them an email.
Below is his response.
"Dear Matt: Thankyou for your inquiry regarding protecting that Bronco from a fire situation. NASCAR requires us to supply a 10 lb. halon container with a automatic thermal release for the fuel cell. I realize you don't have a fuel cell as situated in a NASCAR race car design but rather want to protect, the engine compartment, the running gear, the interior...you did not mention the gas tank area. Here is what we can do for you. Using Halon, which has no equal as you probably know, we could install a 10 lb. halon with that outlet conveyed to two distribution points. These would be palm activated switches and you would have the option of one unloading in the engine compartment and the running gear (I think that is where you have your gas tank) and the second one, when activated, would unload in the driver's compartment. Does this sound like something you could live with? We attach our palm operated switches to the 1 1/2 tubing found in the interior of most race cars (measures 1 3/4" round) however, if this is not possible, we can locate these devices in the dash board, down on the floor, etc etc. The nozzles are of two types, holes at the end for that direction spraying and holes on the sides for that direction in spraying. (Actually it doesn't mean much as when the halon goes off it floods that applied area. (You only need an 8% mix of halon in the air and NOTHING can burn. It will put out a fire immediately as you probably know. By using a T connection, you can route the aluminum tubing (1/4") to about any area you wish in multiple numbers. We also have automatic thermal releases. You might consider that option as you would then have automatic / and or manual release. COSTING: For an elaborate twin activation system, 10 lb. halon with our exclusive brackets, all piping, SS hoses for connection to activation switches, etc.Probably around $585.00. Delivery.. immediate.Terms: Credit Card.Shipping... haz mat fee at $20.00Ground freight to your location at x Great to hear from you, call me at 321 752 9096 and ask any questions that you may have concerning this e mail One thing to remember, if you have crossmembers in our car using that 1 1/2" tubing, let me know how it is situated."
But I started thinking about George my body shop guy. He is a CORE racer and has built race trucks. He has also custom built fire suppresion systems. I went out there today and told him what I want and is going to think about and give me a price.
I will let everyone know what he says.
Matt











