firewall plugs

[JoeJoe]

Does anyone no where i can find those rubber plugs u use to plug holes in firewall/ floor boards? i thought some of the box stores used to sell them in there help asiles i looked today with no luck. Thanks

 

[savage]

I have used plugs from a hardware store to plug holes in the firer wall,they were in the nut and bolt area.

 

[kaw550]

x2
I saw at the local hardware store last week

 

[bronconut73]

X3 saw them at Lowes today. Not sure if they were the exact right size. I have also seen them at electronic supply stores ie Electronic Barn not Best Buy.

 

[needabronco]

Go to a body shop and ask. They all usually have boxes full of them in various sizes that they pull off of cars going to the junkyards.

 

[Ovalis]

check out some of the mustang websites. They have a lot of parts like that that you won't find on the bronco sites.

 

[Ovalis]

forgot to add that I just bought some of those plugs from National Parts Depot, but had to find them under the mustang catalog

 

[Pa PITT]

... I bought some plastic ones from a Hardware store but then I sprayed mine with undercoating to seal them.

 

[bullseye54]

If you have a paint supply house around most that I've seen have them with the trim clips & trim screws on a rack. If all else fails walk the pic n pull with a screwdriver & get a selection.............Bob

 

[JoeJoe]

Thanks for the ideas all check hardware stores fisrt

 

[brian72]

at lowes in the special hardware area... there are some different size silver disc looking grommet type pieces....

 

[classs]

www.granger.com