• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

flammable day in broncoland

t.lay

Bronco Guru
Joined
Mar 17, 2005
Messages
1,261
Loc.
Grayslake, IL
thought I had an all cotton/canvas moving pad - welding together a new roll bar - turns out it wasn't - :eek: so as the pad melted down - it roasted the seat back and the paint on the rear quarter. I didn't completely like how the paint came out anyway, so now I've good a good excuse to rework it. Lesson learned - only good welding blankets and patience. Also make sure you've got a fire extinguisher that works and is a short reach.
 
OP
OP
t.lay

t.lay

Bronco Guru
Joined
Mar 17, 2005
Messages
1,261
Loc.
Grayslake, IL
Seems like it usually takes me a few tries before I get stuff right. The way I figure it - I'll have to build 2 or 3 broncos to end up with one really good one. The only bad thing is it's the same truck over and over. The good thing is I know about every square inch of it.
 
Top