• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Floor pan clean up help

Smedley

Sr. Member
Joined
Feb 28, 2004
Messages
928
Loc.
Snohomish
I am going to order the POR 15 floor pan resto kit and I am currently stripping down all of the paint. I am using Aircraft Stripper and a cordless drill with a wire wheel......any other tips or tricks to clean them up?


Thanks
Will
 

2badrotties

Just a Bronco guy !
Joined
Sep 10, 2002
Messages
6,854
Loc.
Niskayuna N.Y.
TIP - you better get EVERY SINLE SPECK of stripper out of every little crack, crevis, and spot weld mark. If you leave any trace of old paint or primer that has had stripper on it, your new paint won't dry there. Been there done that and it sucks. :)
 

BroncoJAK

Bronco Guru
Joined
Sep 24, 2002
Messages
2,813
I never use stripper for that very reason. I hate the stuff. Only time I would consider it is on a small piece, and I'd still blast it.
 

FOMOCO_1546

Contributor
Full Member
Joined
Jun 17, 2001
Messages
235
Loc.
Central Pennsylvania
I use those black plastic wheels in a mini die grinder. I use the 2'' ones. You can buy a bigger type at Wal-Mart and use a drill if you don't have an air compressor. They work way better than a wire wheel.
 

cdkaminsky

Full Member
Joined
Jun 13, 2005
Messages
212
Loc.
Pflugerville
2nd that

FOMOCO_1546 said:
I use those black plastic wheels in a mini die grinder. I use the 2'' ones. You can buy a bigger type at Wal-Mart and use a drill if you don't have an air compressor. They work way better than a wire wheel.

I used the black plastic wheel as well....I have on that looks like 2 stacked on each other....I removed POR 15 from areas I need to weld and it did a nice job. I had not problems with damage to the metal....

I use them in a 18v Ryobi drill.....work great...
 

Baja71

Bronco Guru
Joined
Oct 16, 2004
Messages
2,908
FOMOCO_1546 said:
I use those black plastic wheels in a mini die grinder. I use the 2'' ones. You can buy a bigger type at Wal-Mart and use a drill if you don't have an air compressor. They work way better than a wire wheel.

What black plastic wheels? Do you have a pic?
 

Baja71

Bronco Guru
Joined
Oct 16, 2004
Messages
2,908
2badrotties said:
I think they are talking about 3M " clean and strip " wheels. Some people call them fuzz wheels :)

The ones that look sorta like pot scrubber material?
 

hd03sporty

Sr. Member
Joined
Nov 4, 2003
Messages
388
Loc.
Tucson AZ
Another good product is the 3M "bristle disks" work just like a wire wheel without all the bristles flying all over the place, comes in different sizes and abrasive levels and there is abrasive imbedded in the bristles themselves...wont "warp" metal either...

http://www.sculpt.com/catalog_98/abrasives/3m_finishing.htm
 

Attachments

  • bristle.jpg
    bristle.jpg
    148.5 KB · Views: 100

Baja71

Bronco Guru
Joined
Oct 16, 2004
Messages
2,908
cdkaminsky said:
Here is a link to the picture

it looks like a bunch small rubber pieces compacted.....together...

Looks like what I was thinking of...how long do these last in comparison to wire wheels on basic paint removal?
 

cdkaminsky

Full Member
Joined
Jun 13, 2005
Messages
212
Loc.
Pflugerville
durability

Honestly, I have not used the disk for a ton of work....I have removed some POR-15 from some areas I need to weld and have used it in my cargo area.

THe only damage I saw to the disk was when it would catch on a corner or edge. Pieces of the material come off...but no big deal...

Good Luck!
 

eds66bronco

Bronco Guru
Joined
Aug 3, 2004
Messages
1,119
Loc.
Essex, Vermont
how'd the new addition to the family work out? hope mom and the little one are doing good. give me a shout, i've got a spot and pressurized sand blaster if you need to use one to get all the stuff out.
 
OP
OP
Smedley

Smedley

Sr. Member
Joined
Feb 28, 2004
Messages
928
Loc.
Snohomish
Ed thanks for the thoughts, however the Doc did some tests and determined that the little man's lungs weren't ready yet (we are about 2 weeks from due date) so he postponed it to this Friday (12 Aug).
As far as your offer with the pans, I might just take you up on it. I just need to find the time.
In another post I mentioned that I found what remains of 69 Bronco. 302, D30, 9", 3 speed and Tcase. Not sure of the overall condition of it, but if you need anything off it let me know.

Thanks Again

Will
 

eds66bronco

Bronco Guru
Joined
Aug 3, 2004
Messages
1,119
Loc.
Essex, Vermont
i've got a good collection of parts going myself but as the wife's project starts, i may need a few things ;D

you are welcome to use my stuff, i'll be out of town this weekend and next, but after that, i'll be free to lend a hand. i would still love to do a vermont get-together family bbq at my place so we can bs about broncos and put some faces to names! your wife and little guy will be in our prayers for a safe happy delivery.
 
Top