SOLD Ford 9 Posi/Limited Slip Differential

[SSDDBRONCO]

Im selling my Ford 9 Posi/Limited Slip differential for $175 obo. Nothing wrong with it, works great, just replaced it with a grizzly locker. It's for a 28 spline axle shafts.
Will ship on your dime.

-Also have BB 28 spline axle shafts with new bearings press.
http://classicbroncos.com/forums/showthread.php?t=224270

Thanks

 

[Pa PITT]

What gears was it on 3;55 or 4:11's

 

[SSDDBRONCO]

4.11
But the gears dont matter with a Ford 9 carrier.

Sent from my SPH-D710 using Tapatalk 2

 

[SSDDBRONCO]

Bump

Sent from my SPH-D710 using Tapatalk 2

 

[Pa PITT]

Are you sure about the gears don't matter. It's been said on here forever than the 355 carrier will work up to 3.73 then you need 3:92 and up.
... I'd love to think your correct but I don't think you are .
.. Good Luck.

 

[SSDDBRONCO]

Are you sure about the gears don't matter. It's been said on here forever than the 355 carrier will work up to 3.73 then you need 3:92 and up.
... I'd love to think your correct but I don't think you are .
.. Good Luck.

I'm 99% sure. If you look at lockers for a ford 9 they dont mention the up and down numbers. When i ordered my grizzly locker the guy said that the locker can be used for any gears. But for the dana 44 then that's a whole different axle so the up and down do matter. Maybe someone else will chime in and tell me if I'm wrong or right.

Sent from my SPH-D710 using Tapatalk 2

 

[Pa PITT]

I believe that the same unit I have in mine. Now I did think that I could by a thicker set of gears to go to 4:11.. Some one will chime in here soon .
.. I Hope your correct. I think I'd like 4:11's in mine.

 

[cs_88]

4.11
But the gears dont matter with a Ford 9 carrier.

Sent from my SPH-D710 using Tapatalk 2

This is correct.

Thick gears are for the Dana.

 

[Bronco73]

Just to back up the others the D44 axle is the axle that is carrier specific, not the 9 inch axle.

 

[SSDDBRONCO]

Thanks. Appreciate you guys for the confirmation.

Sent from my SPH-D710 using Tapatalk 2

 

[Pa PITT]

Well I guess I learned something today. So the rear axle it doesn't matter but the Front it does...... Thanks.

 

[SSDDBRONCO]

Well I guess I learned something today. So the rear axle it doesn't matter but the Front it does...... Thanks.

We learn something new everyday. Interested?

Sent from my SPH-D710 using Tapatalk 2