• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on.

    Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

CA ford small block c6 auto trans with dana 205 fresh rebuild

Status
Not open for further replies.

350hertz

Contributor
Bronco Guru
Joined
Oct 11, 2011
Messages
1,556
I have a fresh rebuild trans went different direction with project has Np205 t case attached or you can purchase a Dana20 adapter and works just as good...
 
Last edited:
OP
OP
3

350hertz

Contributor
Bronco Guru
Joined
Oct 11, 2011
Messages
1,556
Sorry this c6 mated to np205 but is the 4x4 trans that is also used for the Dana 20 adapter you can put purchase from most bronco suppliers...
 
Status
Not open for further replies.
Top