• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Front Fender Removal/Installation

daddyo

Full Member
Joined
Aug 9, 2003
Messages
262
Loc.
Southern California
How is the front fender mounted?

My front fender has been nudged so that it is not flush where it
meets the rocker panel, and I was going to try and adjust it myself.

It looks like some fasteners under the hood, and some fasteners
on the front door jam. What hold/locates it down by the rocker?


Thanks.

Andrew
 

72moore

Sr. Member
Joined
Sep 17, 2003
Messages
392
re

Should be a bolt there. There is not much you can adjust there, other than banging around with a hammer or a pry bar. good luck ;)
 
Top