Front Licence plate. .

[Dickie]

I have two holes in the grill and no holes in the bumper. What do you guys do for mounting it in these holes

 

[56f100bbw]

Front bumper has a bracket to Mount the license plate center of the bumper holes are underneath the bumper not on the face don’t have a picture handy to post

 

[thegreatjustino]

Threaded inserts for the grille holes to mount it there, or find the stock license plate mounting bracket for the bumper to mount it there.

 

[Dickie]

Front bumper has a bracket to Mount the license plate center of the bumper holes are underneath the bumper not on the face don’t have a picture handy to post

Thanks I found those but what bracket do you use. Thanks very much. Any link would help

 

[Dickie]

Threaded inserts for the grille holes to mount it there, or find the stock license plate mounting bracket for the bumper to mount it there.

Where would I get that bracket. Please

 

[reamer]

If I can see one, I can make them..

 

[Slowleak]

Where would I get that bracket. Please

Most early Bronco parts vendors will have them. Here is one.

66-77 Ford Bronco Front License Plate Bracket-Broncograveyard.com

shop.broncograveyard.com

 

[Dickie]

Most early Bronco parts vendors will have them. Here is one.

http://[URL]https://shop.broncograv...MIzISF-cH6_QIVqilMCh0zowh0EAQYBCABEgJzFfD_BwE

[/URL]

Ordered. Thanks for your help

 

[reamer]

how does it attach to the bumper?

 

[904Bronco]

how does it attach to the bumper?

Small carriage bolts, square holes on the bottom of the front bumper

 

[reamer]

so this bracket spans both frame horns?

 

[904Bronco]

so this bracket spans both frame horns?

No, it is centered in the front bumper. I don't have anything to provided a measurement, but say two square holes 3.5" or so, off-center of the middle of the bumper.

 

[reamer]

Thank you,.....anyone have a photo?

 

[Slowleak]

Not the best photos, but you can see the carriage bolts underneath.

 

[Glass Pony]

I have two holes in the grill and no holes in the bumper. What do you guys do for mounting it in these holes

I just put a couple rubber gromets in the holes in the grill so the paint wouldn't chip and then "through bolted" it with some 1/4" stainless bolts.

 

[sprdv1]

Ordered. Thanks for your help

that's how they roll