amc78cj7
Sr. Member
Let's move the important stuff to the top. Buy this and you will be allowed to attend Camp Jeep 2007. Something I know all Bronco owners envy.
http://www.jeep.com/jeep_life/events/camp_jeep/
Pics in post 2
The more I look at the EBs, the more I think it may be fun to own. I am considering selling or trading the CJ7. Pic in my avatar:
<-------------
Titled as a 1978 CJ7. I did a frame off a year ago when the Jeep had only 65k miles.
Fiberglass body
Hinged front fenders
LED tail-lights, recessed
Sandblasted and POR-15'd frame. Extended shock mounts on all four corners
Full roll cage (covers entire seating area, front and rear) tied into frame
custom rock sliders also welded to frame
Swingout bumper / tire carrier
Throttle body injected Chevy 350
flex-a-lite black magic electric fan
aluminum radiator
Centech wiring harness
700r4 tranny
B&M megashifter
NP241c t-case with JB conversions slip-yoke eliminator
Borgeson Heavy Duty steering shaft
Full width high pinion kingpin Dana 60 front with heim high-steer, dual piston caliper disc brakes 5.13 gears
Full width full float D60 rear with disc brakes and detroit locker 5.13 gears
tom woods CV driveshaft
dual optima batteries (one red, one yellow)
Warn XD9000i winch
(5) 38x15.5x17LT Super Swamper Radials (95% tread, almost new) on 8 lug aluminum rims
Boomerang shackles
Spring Over Axle with Wagoneer front leafs on all corners (about 8-10" lift and super flexy).
Factory fiberglass Hardtop + safari bikini top
Full steel doors (late CJ model with paddle handles)
Two-piece soft doors also with paddle handles
I will only consider selling for $15,000 firm or possibly a trade for a very nice Early Bronco. I have over $15,000 in receipts for parts (many that I got at a cheaper than market price), not including the labor.
http://www.jeep.com/jeep_life/events/camp_jeep/
Pics in post 2
The more I look at the EBs, the more I think it may be fun to own. I am considering selling or trading the CJ7. Pic in my avatar:
<-------------
Titled as a 1978 CJ7. I did a frame off a year ago when the Jeep had only 65k miles.
Fiberglass body
Hinged front fenders
LED tail-lights, recessed
Sandblasted and POR-15'd frame. Extended shock mounts on all four corners
Full roll cage (covers entire seating area, front and rear) tied into frame
custom rock sliders also welded to frame
Swingout bumper / tire carrier
Throttle body injected Chevy 350
flex-a-lite black magic electric fan
aluminum radiator
Centech wiring harness
700r4 tranny
B&M megashifter
NP241c t-case with JB conversions slip-yoke eliminator
Borgeson Heavy Duty steering shaft
Full width high pinion kingpin Dana 60 front with heim high-steer, dual piston caliper disc brakes 5.13 gears
Full width full float D60 rear with disc brakes and detroit locker 5.13 gears
tom woods CV driveshaft
dual optima batteries (one red, one yellow)
Warn XD9000i winch
(5) 38x15.5x17LT Super Swamper Radials (95% tread, almost new) on 8 lug aluminum rims
Boomerang shackles
Spring Over Axle with Wagoneer front leafs on all corners (about 8-10" lift and super flexy).
Factory fiberglass Hardtop + safari bikini top
Full steel doors (late CJ model with paddle handles)
Two-piece soft doors also with paddle handles
I will only consider selling for $15,000 firm or possibly a trade for a very nice Early Bronco. I have over $15,000 in receipts for parts (many that I got at a cheaper than market price), not including the labor.
Last edited: