fuel line plumbing?

[commadore64]

Hi guys... got a few questions for y'all.

I've got a 351W, (carburetor & mechanical fuel pump) I need to plumb the fuel lines for. My questions are:

1. Can I get by with one line from the gas tank or do I need a return line?
2. How do y'all handle venting the tank?
3. Are y'all running any type of charcoal canister? If so, where is it located?

OK, this will get the discussion started. Based on some of the reply's, I may have more questions.

Thanks.

 

[sanndmann3]

answer to question 1, you don't need a return line for a carb'd set up so single line is all you need. Can't help with the other 2...

 

[Ethansdad73]

#2 the tank vents into the filler. #3 no need for canister unless required for emissions and there is a spot just behind the pass side front on the frame with three bolts in a triagle for the stock braket for the canister

Sent from my SM-G920P using Tapatalk