- Joined
- Aug 12, 2009
- Messages
- 420
Winter is coming and time to make room in the garage for the wife's car. I will be adding more items as I get to them.
Are you local and see something you are interested in but don't want to part with the cash? I have a few projects and could use a set of experienced hands. I'm willing to trade for your services.
The following prices include shipping:
MSD Distributor Cap and Rotor Kit 8482 - $28.00 - pending
https://www.summitracing.com/parts/msd-8482
James Duff 14 Piece Kit 2° Bushing Kit (66-75 track bar bushings) - $55.00
http://www.dufftuff.com/1966_77_Ford_Bronco_4_Urethane_Bushing_Kit_p/6502.htm
James Duff Heavy Duty Lower Coil Spring Retainers - $52.00 - SOLD
http://www.dufftuff.com/Heavy_Duty_Lower_Coil_Spring_Retainers_Bronco_p/5120.htm
K&N X-Stream Airflow Assemblies 66-3110 - $108.00 - pending
https://www.summitracing.com/parts/knn-66-3110
BattlementFab C4 Pan Stiffening Ring - $20.00 - pending
Local pick-up on the following items:
Bronco Design Roadster Inserts - $225.00
Front Tube Bumper (made by a CB member, don't call who) - $125.00
Proto Fab Rear Tube Bumper with Tire Rack - $400.00 - SOLD
Rocker Trim (cut for rear flares by PO) - $100.00?? - pending
Milled Aluminum Bedrail Covers - $50.00 - pending
Dash - $60.00 - SOLD
Dash Pad - $15.00 - pending
Just throwing these out there for free local pick-up before hauling to the dump:
Starter - would make a good paper weight?
Exhaust - scrap metal?
Are you local and see something you are interested in but don't want to part with the cash? I have a few projects and could use a set of experienced hands. I'm willing to trade for your services.
The following prices include shipping:
MSD Distributor Cap and Rotor Kit 8482 - $28.00 - pending
https://www.summitracing.com/parts/msd-8482
James Duff 14 Piece Kit 2° Bushing Kit (66-75 track bar bushings) - $55.00
http://www.dufftuff.com/1966_77_Ford_Bronco_4_Urethane_Bushing_Kit_p/6502.htm
James Duff Heavy Duty Lower Coil Spring Retainers - $52.00 - SOLD
http://www.dufftuff.com/Heavy_Duty_Lower_Coil_Spring_Retainers_Bronco_p/5120.htm
K&N X-Stream Airflow Assemblies 66-3110 - $108.00 - pending
https://www.summitracing.com/parts/knn-66-3110
BattlementFab C4 Pan Stiffening Ring - $20.00 - pending
Local pick-up on the following items:
Bronco Design Roadster Inserts - $225.00
Front Tube Bumper (made by a CB member, don't call who) - $125.00
Proto Fab Rear Tube Bumper with Tire Rack - $400.00 - SOLD
Rocker Trim (cut for rear flares by PO) - $100.00?? - pending
Milled Aluminum Bedrail Covers - $50.00 - pending
Dash - $60.00 - SOLD
Dash Pad - $15.00 - pending
Just throwing these out there for free local pick-up before hauling to the dump:
Starter - would make a good paper weight?
Exhaust - scrap metal?
Attachments
-
Dist Cap:Rotor.jpg62.8 KB · Views: 51
-
Rear Bumper.jpg72.3 KB · Views: 70
-
Front Bumper.jpg73.8 KB · Views: 75
-
Inserts.jpg64.1 KB · Views: 53
-
C4 Pan Ring.jpg77.3 KB · Views: 50
-
KN Air Filter.jpg74.2 KB · Views: 45
-
JD Coil Cups.jpg72 KB · Views: 45
-
Bushings.jpg63.4 KB · Views: 51
-
Starter.jpg53.4 KB · Views: 46
-
Exhaust.jpg73.9 KB · Views: 62
-
Rocker Trim.jpg66.3 KB · Views: 67
-
Rail Covers.jpg62.4 KB · Views: 71
Last edited: