Gauging interest in led mass buy "update mass buy on"

[naneumranch]

I'm in for 20 inch bar I will let you know which one

 

[badmuttstang]

Nice prices! Do the lights include any type of cover or are covers available for purchase separately?
DOT in my area will pull over and fine a driver for running un-covered off road lights on public streets %)

Which lights are you interested in the cr02's and cr04's I know I can get them with covers or you could buy covers straight from rigid the cr02's are the d2's/dually's and the cr04's are d2 hd's/dually hd's. The cr09's are vison x cannons I know I list them as 4" and vison lists at 4.5" but they are the same light, Im tring to see if I can get the covers or if they would have to be bought straight from vison x. Looking into other lights right now.

 

[badmuttstang]

I'm in for 20 inch bar I will let you know which one

Sounds good just let me know.

For everyone else I will be posting this in the vendors section next week sometime and will be making some changes on the prices for some of the lights as I there is enough people ordering some of them that my supplier is lowering the price and Im passing on those savings.
If anyone has questions feel free to ask it may take a little while to respond but I will make sure to try and address everyones questions.

Thanks
John

 

[stagecoach]

WOW John, your prices are very good. I bough from your last batch and am quite happy. Question, does the combo lights have the option of turning on one or the other lites or just both at the same time?

Thank you
Art

 

[jim3326]

Would be interested in a couple pair of the cro5f, got some bumpers to build and some of the 02-04 type when I figure out what I want to do.

Jim W.

 

[brandenpro]

I want to mount a 10" to one of these. Which one works for this mount?

http://shop.poisonspyder.com/Hawse-Fairlead-Rigid-10-LED-Light-Bar-Mount-p/45-28-r10.htm

 

[badmuttstang]

WOW John, your prices are very good. I bough from your last batch and am quite happy. Question, does the combo lights have the option of turning on one or the other lites or just both at the same time?

Thank you
Art

Art, none of the regular light bars listed have the option to turn on just the flood/spot separately if you look at the PDF attached at the bottom the CR42 has the option of controlling the flood and spot beam separately its basically two separate light bars stacked on top of each other so two rows are flood beams and the other are spot.

Would be interested in a couple pair of the cro5f, got some bumpers to build and some of the 02-04 type when I figure out what I want to do.

Jim W.

Jim, sounds good just let me know when you get it figured out.

I want to mount a 10" to one of these. Which one works for this mount?

http://shop.poisonspyder.com/Hawse-Fairlead-Rigid-10-LED-Light-Bar-Mount-p/45-28-r10.htm

Brandenpro, if you want to stick with a 10" light the CR26 is the one that will work for you but you could use the CR27 or CR28 as well they mount from the side or the bottom and the bottom mounts slide so they will adjust to any mounting distance. CR19 thru CR21 also offer the same mounting option so you can go from a 10" on up to a 22" light or do like is listed on poison spyders site and mount 2 small individual lights.




So for everyone else that has been wondering about longer light bars the PDF here has most of the other light bars I can get. I did not list a price because it would depend on demand for that light my prices are low on them but I think shipping might be the deciding factor so if theres one you want let me know and give me your zip so I can give you an idea of shipping costs as well.

John

 

[FlogginHarvey]

Wow, I'm interested to say the least.

Here is another fair lead mount for a 13.5" light bar. Have something that will fit? Was originally hoping go with a combo.

http://www.motobilt.com/univeral-led-mount/winch-fairlead-12-led-light-bar-mount.html

For the price I was also considering a pair of rounds and maybe something to flush mount in the rear bumper...

 

[badmuttstang]

Wow, I'm interested to say the least.

Here is another fair lead mount for a 13.5" light bar. Have something that will fit? Was originally hoping go with a combo.

http://www.motobilt.com/univeral-led-mount/winch-fairlead-12-led-light-bar-mount.html

For the price I was also considering a pair of rounds and maybe something to flush mount in the rear bumper...

Either the CR22 or CR27 should fit that mount with no issues the CR22 might need a washer on each side but that would be it as they both mount from the side.

 

[brandenpro]

I'm in for one of these just not sure which yet.

 

[badmuttstang]

I'm in for one of these just not sure which yet.

Just let me know and if you have any questions feel free to ask you can pm me if you want with them or ask right here.

John

 

[Hank_]

Here is the link for the mass buy http://classicbroncos.com/forums/showthread.php?t=254909


Thanks for the deals on the lights John,

Hank

 

[badmuttstang]

Hank just sent you a pm on shipping.
Thank you

John

 

[badmuttstang]

Just wanted to make sure those that might have marked this thread to watch for the mass buy did see that it is happening and the deadline is the 10th. So if you have any questions feel free to ask plus the price sheet has been updated due to the sells that have already been made which lowered the price on some of the lights.

Here's a link to the official mass buy thread. http://classicbroncos.com/forums/showthread.php?t=254909

Thank you to all that have already committed to the buy and anyone that wants lights but doesn't have the funds right now please contact me I will make sure to order those along with the other extras that I usual order and we'll work out something on your lights. Here's the new price sheets as well.