• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Hard top caulk?

70 Bronco

New Member
Joined
Sep 20, 2008
Messages
11
Loc.
Richmond, VA
I am preparing to paint my hard top but the "caulk" in the roof gutter is breaking out and needs replacing. What should I replace it with? is it the same material that goes in all the body seams?
 

allenfahey

Bronco Guru
Joined
Mar 18, 2004
Messages
2,672
You can use regular seam sealer. It would be better looking and easier to use self leveling seam sealer. You get it from an auto body supply place. Make sure you prime and scuff the seam first. Don't apply on bare metal. Apply it jusst before paint, let it set up and then paint directly overtop the seam sealer
 

DanWheeler

Bronco Guru
Joined
Nov 8, 2005
Messages
2,572
Loc.
Kirkland, WA
Its always nice when someone beats you to posting the exact same question you had.

Whats the best way to get the old seam sealer out? or should you just go over whats already there?
 
OP
OP
7

70 Bronco

New Member
Joined
Sep 20, 2008
Messages
11
Loc.
Richmond, VA
Thanks for the help. It looks like the old sealer is raised more at each corner and I'm guessing it is done that way to run water out of the gutter. Will I still acheive this effect with the self leveling sealer? how much time after installing sealer should I wait until I can paint?
 

allenfahey

Bronco Guru
Joined
Mar 18, 2004
Messages
2,672
Thanks for the help. It looks like the old sealer is raised more at each corner and I'm guessing it is done that way to run water out of the gutter. Will I still acheive this effect with the self leveling sealer? how much time after installing sealer should I wait until I can paint?

It will set up in about a 45 minutes. It has about the same visocity as honey maybe a bit thinner. If you want the sealer to slope I would apply it level. After it has started to setup tilt the top back, apply more just in the corners. Let that setup then tilt forward and apply in the front corners.
 

66bronco74

Jr. Member
Joined
May 26, 2009
Messages
79
Loc.
Upland, CA
I had my top done last year at a body/paint shop. They found (When they removed the old sealer) that my top had drain holes in the gutter in each corner. Ford seams to have just goup the stuff on and filled the holes originally. So the shop cleaned out the old stuff and left the holes open. My gutters now drain nicely.
 
Top