Help solve 5.0 serpentine bracket puzzle

[jcb9089]

I picked up a project from PO that was installing efi. It has the serpentine brackets in it, but he can't remember what kind of vehicle they came out of.

I'm trying to find an AC eliminator pulley but have no idea what vehicle to get it for. Any ideas what vehicle this came out of?

The next question, will it work to just run a smaller S-belt and not even worry about using a ac eliminator and smog pulley, like in the picture?

 

[TwoDalesDad]

It could be a lincoln....

 

[66fora69er]

I dont run an AC eliminator pulley. I used the Lars WH PS bracket that puts the PS pump up high. I can get you the belt number of you go that route

 

[Pedestrian]

I don't know what serpentine setup you are running, but I was able to eliminate the A/C and smog pump on my 89 Mustang just by using a shorter belt. Similar to the diagram you have.

 

[mustangsean]

It's from a Lincoln, I have that same motor

 

[barronj]

I run the FMS AC delete

 

[Ourobos]

Without move the PS pump up as mentioned, your belt will most likely rub on it's self, it not immediately, eventually.

 

[77BRONKOTN]

Mine looks the same, mine is a 91 Lincoln.

I put a delete pulley where the AC isn't. Just had to get it lined up right with the belt.