Cortez
Bronco Guru
- Joined
- Jan 29, 2009
- Messages
- 1,193
I need a little help here. I'm in the process of making the PS conversion on my '67 and have a 3-bolt crank pulley that's only a single groove. To hook up the PS I need a 2-groove pulley. Went to NAPA today at lunch and they couldn't help.
Does anyone have a solution for this? Either point me to a series of vehicles that used the 351W with PS so I can locate one in the Pull & Pay or provide a new pulley solution?
Any help would be greatly appreciated.
The 351W doesn't have much extra space between the crank pulley and radiator - it's tight now. I didn't want to go to a serpentine due to the cost, but would consider it if there's a junkyard solution that's cheap.
Thanks!!!
Does anyone have a solution for this? Either point me to a series of vehicles that used the 351W with PS so I can locate one in the Pull & Pay or provide a new pulley solution?
Any help would be greatly appreciated.
The 351W doesn't have much extra space between the crank pulley and radiator - it's tight now. I didn't want to go to a serpentine due to the cost, but would consider it if there's a junkyard solution that's cheap.
Thanks!!!
