• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

High Torque Mini Starters

Airmapper

Foolproofness Tester
Joined
Mar 15, 2006
Messages
1,710
Loc.
Bowling Green, KY
My starter is shot, so I need another one. As a general rule if I can replace an item with something better, I will, so I'm looking for a high torque mini starter.

I could not find any recent threads on this swap, the only info I found was at least a couple years old, and people were claiming to be getting them for $50 or so. I thought that sounded great, but I'm not finding those deals it seems.

Right now I checked NAPA as it's the closest place I regularly do business (as in never have trouble returning stuff) cheapest I found there is $144 and that assumes they will take my old stock starter as a core, otherwise add another $50 or so.

Part Number: RAY 2449254

I'm searching based on a '95 F-150 with a 302, manual transmission, is this correct? I'll need to check my flywheel as well, it should be the stock flywheel for a '70, 302 to 3-speed. I'll look in there and see if I can positively ID the flywheel though.

Thanks for any assistance, I was hoping I could choose my own time to do this upgrade, but I guess the Bronco decided it wants it now. :eek:
 

fungus

Bronco Guru
Joined
May 27, 2009
Messages
1,548
Loc.
Kaneohe Bay, Oahu
Mine is a junkyard starter and has worked flawlessly for 3+ years for $28! '92-'96 F-series pickups with 4.9, 5.0 OR 5.8L and manual trans should be the right starter for you. The one I'm running with my 302/ NP-435 came from a '92 or '93 4.9L F-150 w/ manual tranny.
 

BRONCO26

Sr. Member
Joined
Jan 17, 2006
Messages
508
Loc.
SENOIA
yes that the right number or you can go with a 4n9254 which is a new one or a 449254 tha t is a premium rebuilt one. i would go new if it was me. alot better warranty on new one.
 

adam1ton150

New Member
Joined
Jun 15, 2007
Messages
32
Loc.
knoxville
If you have a manual then you should need the manual starter, if you have an automatic you should need an auto starter. Visually the difference is if the gear protrudes or not when retracted. The auto ring gear is usually on the transmission side of the flexplate requiring the starter gear to stick out further and the manual ring gear is usually on the engine side of the flexplate making the starter gear flush when retracted. Just to be sure, pull your starter out and confirm where your ring gear is. Then order the auto or manual from db according to what you find. They have the best prices I have found. Parts stores are a good bit more pricey, but in a pinch a 92-96 F-150 auto or manual starter is what you are buying.

Unless its 157 tooth, then I think it is opposite. I'm pretty sure the 157 tooth manual uses an auto starter.
 
Last edited:

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
I have a DB starter on my 6.9IDI and I love it, I'm going to get my next starter from them too.
 
OP
OP
Airmapper

Airmapper

Foolproofness Tester
Joined
Mar 15, 2006
Messages
1,710
Loc.
Bowling Green, KY
I checked my flywheel, it has the teeth closer to the engine side, so I'm assuming it's the 164 tooth Manual flywheel, as it should be. (See pic.)

Also using info I found here: http://www.bcbroncos.com/ford starters.pdf

I think I'm going to pull the trigger on this (LINK). Looks like the correct one if I read it correctly, anyone agree?
 

Attachments

  • IMG_4032.jpg
    IMG_4032.jpg
    119.9 KB · Views: 72

hyghlndr

Contributor
Bronco Guru
Joined
Jan 19, 2009
Messages
5,264
Loc.
Hockessin, Delaware
I got mine on ebay DBelectrical and it was under 60 shipped.

I have also had good luck with the Mean Green Mini starters but they are expensive.
 
OP
OP
Airmapper

Airmapper

Foolproofness Tester
Joined
Mar 15, 2006
Messages
1,710
Loc.
Bowling Green, KY
I bought one from DB just now for $52 and some change, free shipping. Crossing my fingers I didn't overlook anything. If it's a good unit, and the testimony here has my hopes up, that is a great price compared to the parts stores around here.

I'm really going to like the smaller unit I think, the stock one was a pain to get off, that top bolt was tricky, 2 extensions on my ratchet, and you had to remove the ratchet after you got it loose or you couldn't get it out. Thankfully the bolt wasn't very tight.

I'm actually kinda excited, if it gets to me by this weekend, I might actually get enough buttoned up on the Bronco to pull out of the shed for the first time this year, maybe... :cool:
 

adam1ton150

New Member
Joined
Jun 15, 2007
Messages
32
Loc.
knoxville
Looks like you got the right one, sorry I was in a hurry when I posted yesterday and wrote the side the ring gear is on backwards. I'll edit it so other readers don't get the wrong information, but everything else was correct.
 
Top