Holley Fuel injection

[bobby]

Has anyone put the holley fuel injection on their rigs. Thinking of putting it on mine ;D

 

[Guest]

My brother has run one for about 4 years. Make sure that you have a good fuel filter and that you have a good ground. It ran alot better when we put the oxygen sensors in it. They did not come with his original but became an option later. I think they are standard now. It runs sweet and has no problem on steep climbs or bouncy situations. We put it on in one afternoon.

 

[bobby]

I was wondering did he use the holley fuel pump I heard that the pump was gravity feed. Didn't know how it would work with 2 gas tanks

 

[tonto]

I also ran it years ago when it first came out, mine had no oxygen sensor and it was a kit later and standard when you bought it.<br>I never liked mine and sold it to a Chevy guy, but I heard the newer ones with the O2 sensors do work well and the ability to set the fuel curve with a lap top makes 'em more flexible.<br>Funny thing is you never here or see anyone who actually is running one say how great they are, maybe the next post on this thread will make me eat these words <br>

 

[Waverous]

I have been researching efi setups and tbi setups - NO ONE has every suggested using a Holly Projection setup

 

[uncut69]

I've been running mine for almost one year, 2di w/O2 sensor on a 351w. Starts great had no problems running Moab ;D but it has NO BALLS :'( compaired to the previously installed Edlebrock carb. The install was easy and was done in one day . Cost $1500+ when finished . I can return to the carb if needed in a pinch (your usually stuck buying parts from a Holly source). Do a Ford injection for less, parts are available at any good part house.

 

[tonto]

[quote author=uncut69 link=board=5;threadid=13444;start=0#101439 date=1043007706]<br>I've been running mine for almost one year, 2di w/O2 sensor on a 351w. Starts great had no problems running Moab ;D but it has NO BALLS :'( compaired to the previously installed Edlebrock carb. The install was easy and was done in one day . Cost $1500+ when finished . I can return to the carb if needed in a pinch (your usually stuck buying parts from a Holly source). Do a Ford injection for less, parts are available at any good part house. <br>[/quote]<br>I ran mine on a 351W also and removed/replaced it with a Carter AFB it was like night & day, felt like I put in a new built motor with the Carter, just went to show me how much the Holley was not performing, I ran it for about a year and was almost constantly playing with it. Later, Francois.

 

[67ster]

You would think Holley would have that deal worked out by now . The o2 deal is a must to make any of those systems work well . Keep your eye on MSD , according to one of their reps. , they are coming out with an easily tunable, killer system .