Hydraulic Bellhousing Question

[75Bronc]

I am gathering parts for an NP435 swap. I am converting from an auto. To make things easy I will be going with a hydraulic clutch. I found a bell housing at a junk yard (E4TA-7505-DA) from a 1984 F150. Does the slave cylinder bolt to the two holes on the side? Or does a bracket mount to the holes? I expected there to be a bracket. If I buy this bell housing, can I buy the bracket anywhere?

 

[LilMixedUp]

I bought a bell housing a while back that has the bracket. I'll see if it has numbers on it and get back with you. Also, look at NOVAK web site they have slave cylinders for the early style Ford Bell housings

 

[Broncobowsher]

Rock Auto FORD 1984 F-150 5.0L 302cid V8 Transmission-Manual Clutch Slave Cylinder

Look at the pictures. Sure looks like there is a bracket is going to be needed to attach one of those slave cylinders. Nice part is they also list the bore size which will help you figure out what size clutch master you will need.

 

[75Bronc]

Mixedup, do you want to part with the bellhousing? Or the bracket?