• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Hydroboost and Ram assist

z70what

Bronco Guru
Joined
Oct 28, 2005
Messages
1,022
Loc.
Johnson City
I have the WH4x4 Hi Volume pump and ram assist kit. I'm wanting to upgrade my brake booster to the hydro boost (MOAB) unit that they sell. Does anyone run this and know if I can run both? I don't want to affect the ram assist power as I run 37's.

I've heard people having issues with hydroboost and ram assist or needing to send their hydroboost unit in to be ported in order for both to work correctly. Looking for advice.

Thanks.

Luke


Sent from my iPhone using Tapatalk
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
I'm running my hboost and ram assist with a stock Saginaw pump. I've heard that porting the hboost unit might be required for some high flow pumps...cannot confirm that.
 

ET

Contributor
Bronco Guru
Joined
Jun 14, 2001
Messages
1,800
Loc.
Dallas, TX
I'm running stock sag pump and hydroboost out of diesel breadvan. Ive always been curious of folks having problems if they are using a car hboost or an astro van or and diesel hboost. And also what bmc stated, stock sag pump vs. hi flow pumps.

Eugene
 
Last edited:

Bronco Brian

Bronco Guru
Joined
Feb 10, 2006
Messages
1,140
I sent my pump off to be ported, didn't notice any difference. Ford Explorer PSC pump
 

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
I’ve been running the hydroboost from WH with ram assist and the HD pump they sell for about 8 years. It’s a single return pump with a T in the return line. Just make sure you have the T connected where the pump return and the boost return are not pointed at each other and make sure you get all the air out. Mine works great. The only issue is if I’m hard on the brakes sitting still and need to turn the wheel I may have to bump the throttle above idle. I’m running an automatic and so used to it that I do it without thinking now. That could be a little more aggravating with a manual trans.
 

Digger556

Sr. Member
Joined
Aug 8, 2013
Messages
801
Stock Sag pump, 2000 Superduty HB, Delphi 600 steer box, single T return. No issues, can lock up 37s and still have assist left for steering.
 
OP
OP
z70what

z70what

Bronco Guru
Joined
Oct 28, 2005
Messages
1,022
Loc.
Johnson City
Thanks for all the replies. Can y'all snap some pictures of your setups and the T fittings in the lines? Thanks.


Sent from my iPhone using Tapatalk
 
Top