I'm ready to order Raptor Liner, how much?

[sticknstring]

As the tile says I'm at the stage where I need to order the material. My question is, how much do I need for the interior of my Bronco. I going to do the toe boards to the last crease in the floor pan and the sides of the box too. Thanks guys!

 

[Hozr]

2 quarts should be enough for the interior. If you buy the case you get a gun with it and you'll have some for touch ups or more coverage.

 

[sticknstring]

Thanks for the quick answer, I had intended to get the kit with gun gun but I was wondering if the 4 quarts would be enough.

 

[needsmoarturbo]

I would say it depends on how thick you spray it...I thought the folks on here reported using around 4 quarts minimum for the full interior if I recall correctly

 

[langester]

I would agree. It depends on the thickness, air pressure and speed you apply it. I sprayed all of the inside of the tub and used 4 bottles, I wish I would have had one more. I think everyone will have a different answer on the amount. I do agree that if you are going to order it get the 4 bottle set with the gun its a better deal overall.
Good luck with your application!

 

[Starman]

I used 6 bottles on mine. I did the same amount of spraying you want to do. I also did the tailgate though and you did not mention that.

 

[Bronco Brian]

At the same point in the Bronco world as you. I went to the safe side ordered 6 $188.00 Amazon.

 

[sticknstring]

I'm doing the tailgate to so 6 it is. Thanks all!

 

[BoulderMike22]

I mixed some of this into it and it stretched 4 quarts enough to cover the interior (with tailgate) and engine bay.

http://www.hytechsales.com/prodsc.html


Sent from my iPhone using Tapatalk

 

[bronkenn]

Wondering if you can mix some Microspheres with it for insulating purposes? Ken

 

[sprdv1]

2 quarts should be enough for the interior. If you buy the case you get a gun with it and you'll have some for touch ups or more coverage.

Don't hurt to have a little extra..

 

[Builtnotbought0]

Will Raptor work underneath? Or is there something better?

 

[lsukevinc]

Will Raptor work underneath? Or is there something better?

it will work but Upol makes a undercoating. I used it on an old jeep i had and it looked good and did the job.

 

[NGABronco]

I just ordered the 8 qt. set from Walmart for $189 w free shipping!!!;D;D;D
Hope to do bottom and interior???%)%)

 

[FFbronco8]

How many bottles did it take to do the underside? Did 8 get everything done you wanted it to?

 

[bronkenn]

I used 8 bottles and did the full interior and the bottom floor from the firewall to the first crossmember. I also did all 4 wheel wells and the bottom of the hood. I mixed color and insulating beads in it. Went on real nice. Ken

 

[SDBMtber]

I just did the underside a few weeks ago. Used 7 bottles to get two coats. I put the hytech beads in the first coat - which made the coverage a bit different.

 

[FFbronco8]

Thanks for the info. Was thinking I would go lizard skin but the more I think about it I may mix the beads in raptor liner. Has anybody got there truck rolling yet? What's the consensus? Does it work as well as lizard skin?

 

[Timmy390]

What are these "insulating beads/hytech beads??

Tim

 

[SDBMtber]

Tim- here’s what I used. I think others have mixed in as well.

ThermaCels - Insulating Paint Additive 2 Gallon Package https://www.amazon.com/dp/B01AC5WGQI/ref=cm_sw_r_cp_api_eZA.Bb8H8RGBA