- Joined
- Nov 28, 2001
- Messages
- 10,550
Stock instrument cluster with Autometer gauges grafted into the stock gauge locations. This was made for me by one of our favorite builders quite a few years ago and I never got around to installing it.
Each gauge has its specific wiring along with lighting. The gauges are sealed in the back per the photo to eliminate 'light bleed' between the gauges and keep dust intrusion to a minimum.
Wiring is on your own but should be fairly easy to figure out since they're commonly available Autometer electric gauges. The gas gauge is of course the Ford 73-10 ohm unit.
$150 includes the ride.
Todd Z.
Each gauge has its specific wiring along with lighting. The gauges are sealed in the back per the photo to eliminate 'light bleed' between the gauges and keep dust intrusion to a minimum.
Wiring is on your own but should be fairly easy to figure out since they're commonly available Autometer electric gauges. The gas gauge is of course the Ford 73-10 ohm unit.
$150 includes the ride.
Todd Z.
