• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

jackman wheels

illinoisbart

New Member
Joined
Nov 12, 2003
Messages
1
Any of you fellas remember the jackman wheels of the 70's made in St. Louis? I think they are rated 2800 or 3000 lbs per wheel. 5/16 to 3/8 inch thick spokes. I believe Firestone made a replica of these as well. I have 3 jackmans that came with my Stroppe and I am looking for a fourth(jackman or firestone). Believe it or not I damaged the one. Any info is appreciated. illinoisbart
 

70bucks

Sr. Member
Joined
Aug 31, 2001
Messages
373
Loc.
Valley Center SOCAL
That's funny I just posted a thread on another post "Started tearing down axles today". About the Jackmans. I have looked a little in the socal area with no luck. Only the one set my buddy has. 24 years he's been rinning e'm I doubt he'd part. Good luck on your search.
 

tabascom16

Sr. Member
Joined
Oct 12, 2003
Messages
527
Loc.
Salisbury, PA
Your in the same boat as me. I have only 3 of them. Got them off an old f150 I use to have. Unfortunately they are only 15x8's...been looking for 15 x 10's for a while i finally just got some Mickey Thompson Classic II's. My dad is running a set of 15x8 Jackman's. They look sharp. He even has his old rims from when he use to mud drag. Two 15x7 for the front and 15x14 I beleive for the rear. I have never seen anymore of them. As for the ratings, I could never find any but they definately have to be tough. Like you said they are really thick, everything today is half as thick if its steel. Good luck on finding an extra one, I am to for a future project. Like most guys I wouldnt part with my Jackmans. Very excellent rims!
 

67ster

Bronco Guru
Joined
Feb 18, 2002
Messages
1,572
We ran those in the Mint 400 on a class 8 Ford pickup , never had a problem . Jackman was tough and the best buy at the time . US Wheel made a similar steel wheel but thinner .
 

wildbill

Old Bronco Guy
Joined
Jun 29, 2001
Messages
6,890
%) %) %) What I remember about them is they had a problem with cracking were the spoke was welded to the rim then later they came out with the one called wagonwheel that was a ring on the out side of the spokes and they didnt crack like the earley ones. I had a set back about 72 or so andthey also cracked .:p :p :p Bill 8) %) :p
 

BajaBronco

Contributor
Bronco Guru
Joined
Apr 30, 2003
Messages
4,100
Jackman wheels rule. I know of two original Stroppes that have them and are registered on my BajaBronco.com web site. I don't think they are for sale though. I always try to pick that stuff up when I'm at the junkyard, but usually only get full sets. Now I will pick up singles if they are true Jackmans. Anyone have a Gates Commando XT kicking around? I have 4 right now, but need that last one.
 
Top