• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Jackman wheels

bronco loco

It never ends
Joined
Nov 12, 2005
Messages
2,735
Loc.
Long Island New York
I have a chance to get a original set of white spoke Jackman wheels 15x8.5 5.5 with the bronco bs of 3.75. I have not seen them yet, anyone know anything about this wheels, the seller said that that type of wheel was used on Baja races. Any input will be greatly appreciated, thanks...
 

phred

Contributor
Bronco Guru
Joined
Aug 25, 2006
Messages
3,608
Loc.
Earth
Jackman was on of the top off road steel wheel makers in the 70's Very good high quality fully welded wheels. they are heavy though. I like the look of the wheels as the spokes go all the way to the rim and are not a "spoke disc" that just has the triangle punched out.
 

gearida

Bronco Guru
Joined
Jun 8, 2007
Messages
1,428
Loc.
Newburgh, IN
I had several sets on VWs, those are old school looks. Smashed a few over the years. Good wheels, as said heavy.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
One thing to look out for though is that some of the centers were just flat plate steel drilled, not stamped, for the lug nuts. So they had very little countersink and no ridges around the holes and on the back to help hold tension on the nuts. Caused some of them to work loose after a very short time.
For some reason the VW guys didn't seem to have this issue, but the FS truck guys did. A LOT.

Other than that little foible, you would own a piece of history. And that's cool in itself sometimes.

Paul
 

pilotmike

New Member
Joined
Jan 17, 2007
Messages
16
Loc.
Pacific Grove
Jackmans

Hey Loco,
if you ever want to sell those Jackmans, let me know. I have been looking for a set for awhile.
Thanks, Mike
 

Socal Tom

Bronco Guru
Joined
Feb 12, 2004
Messages
2,442
Loc.
San Diego, CA
Jackmans are great on VWs and Buggys, but they don't hold up well when you try and turn hard with a heavy v8 vehicle. They used to be made here in San Diego. I had a HS buddy that ran them on a ford sedan of some sort. He went through several on the front end, the spoke would break at the weld.
Tom
 

broncosam

Bronco Guru
Joined
Feb 8, 2005
Messages
1,188
I had a set of them on my first F-150, a 1977 model. Never had a problem out of them, if I remember they were 15 X 10 inches ,I ran a couple of sets of 12 X 33 tires on them and a set of 15 X 38 Mudders.
 

Roadburner

Full Member
Joined
Mar 14, 2008
Messages
168
Got'em on our trail rig and never a problem. Everybody ran them around here in the 70's and never seen one break. Jackman had a lifetime warranty on the paint and I saw many sets go back. I think that's what put them out of business. They would also make custom wheels per your spec.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
And their magazine ads were cool too! Just came across a bunch of them when I was going through the old mags. Fun stuff.

Paul
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
And as far as the loosening lug nuts thing goes, just look at the center. If it is perfectly flat, just check your nuts every once in awhile. If it's got dimples and ridges and looks like a normal wheel center, then like the others, you shouldn't have any trouble either.

Paul
 

66bronco74

Jr. Member
Joined
May 26, 2009
Messages
79
Loc.
Upland, CA
I have a set on my 74 Baja. Haven't had an issue with the lug nuts loosing. Very heavy duty rims. Nice welds on the spokes. They are a bit heavy than most rims - but that's the stoutness price.

Mike
 

wildbill

Old Bronco Guy
Joined
Jun 29, 2001
Messages
6,890
:D :D :D Look them over real good as they crack on the weld were the center and the rim come together. The only good thing about them is they look good. have fun.;D ;D ;D Bill %) :cool: ;D
 

AWS

Sr. Member
Joined
Aug 2, 2004
Messages
596
Loc.
ST LOUIS
I agree with SocalTom and wildbill, the rim would crack at the spokes and lead to failure. They only seemed to last on the lighter VW-buggies whiched use a narrow tire-rim combo. Just remembering while I still can!
Steve (another old bronco guy)
 
Top