• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Jerry can mount

gasspaser

Full Member
Joined
May 22, 2006
Messages
278
Loc.
St Petersburg FL
What are you all usin for jerry can mounts...I am lookin for options.....I cant mount to the rear of the tail gate...I will crust the mount when I drop my tailgate down.....Thinking of using a mount and install it on the inside of the tail gate, but not cray about fuel fumes in the cab when the top is on....Then again I won't carry extra gas all the time just on the trail.....I was thinking about mounting two on each side of the inner taigate one for water, the other for gas....I don't see how I can put one on the tire carrie...
A pic of the tire carrier is below:

http://www.broncofix.com/album_pic.php?pic_id=158
 
OP
OP
gasspaser

gasspaser

Full Member
Joined
May 22, 2006
Messages
278
Loc.
St Petersburg FL
looks like the link doesn't work, click the one in my signature for my pics, and you can see what i am talkig about

I mounted my Hi Lift on the top portion of the tire carrier and that freed up some space between the back seat and tailgate....Looks like the only way is on the inner tail gate for mounting options
 

scsm76

Bronco Guru
Joined
Oct 6, 2005
Messages
1,433
Loc.
Shaver Lake, CA
Are you running a stock tire carrier?
If so when I bought my second bronco the PO had cut and extended the swing gate about 12" and added a jerry can mount on the hinge side. I removed the whole rack and I think it is ll laying around at my parents somwhere. I don't have any pics though. I would have kept it if the modifications were not done so poorly (ugly welds.) Plus the stock swing gates are tough to keep from rattling.
 
Top