Leaf spring centering pin size needed

[blubuckaroo]

I am making a leaf spring spacer to level my car and need to know what the leaf spring centering hole and pin sizes are. I'm at the shop where I can make it but the car is at home.

 

[blubuckaroo]

The pin is the head of the bolt that holds the leaf spring pack together.

 

[blubuckaroo]

Has somebody got a set of springs laying around that can be measured?

 

[blubuckaroo]

Is This Any Way To Treat A Senior Member?

 

[blubuckaroo]

I know this info is out there! If you have a leaf spring stack setting around, could you please measure the diameter of the head of the centering bolt? I'm trying to make a pad to go on my spring perch to level the car.

 

[blubuckaroo]

You guys are really great help!

 

[bluebronco69]

if i had been on CB today i would have checked for you, i can check tomorrow if you need

 

[Tito]

Hey Mark, did you find out? You could have called me, I'd have gotten you the info.

 

[blubuckaroo]

It was a nice day and nobody was on line I guess! I could still use the info. I'm trying to level the rear. With the bigger side tank, the driver's side sags 3/4".

 

[chuck]

Depends on which spring you have. The bolt size may be 5/16" or 3/8". The round head will be either 3/8" or 1/2"