• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Let's play: Name that connector

TXHusker

Sr. Member
Joined
Mar 18, 2005
Messages
362
Loc.
Edmond, OK
I need help identifying two electrical connectors that are on the drivers side engine compartment through the firewall from the stock harness. What is the square connector and what is it for and the same with the single wire with the blue cover. After you tell me what they are I may be able to answer this question but do I need them for the EFI swap and RJM harness? I couldn't find it referenced.


Thanks for the help

photo


photo
 
Last edited:

Doyle

Bronco Guru
Joined
Jun 12, 2006
Messages
1,015
NSS=neutral saftey switch. On the manual tranny models the other half of these two wires was a jumper. The other two were the backup or reverse light switch on the column linkage.
 
Top