Lifting a 1974 Ford Bronco

[jonny123]

I want to put a James Duff 3.5 suspension lift i was wondering if i would have problems with the axles and have to do lots of other stuff to the axles or stuff under there if i lift it that high.

 

[OldieTwoShoes]

you will be fine, 3.5 isnt that much and it keeps most of the stock geometry functional, and i dont know what problems could arise from the axles..

 

[Blue71]

3.5 shouldn't hurt you. You may need to get a drop pitman arm for your steering and a drop track bar bracket for the track bar. This will keep your steering geometry in line. Make sure they give you the correct degree C-Bushings with the kit. I put a 3.5 on mine and it handles, rides, and flexes fine. Mine has components from Duff as well as other vendors.

Blue71

 

[TJK74]

The only other thing you might need to upgrade would be your drive shafts. By up grade I mean lengthen. They should be fine for street use but its something you should look into doing in the long run.